What are the different types of concrete support walls?

Involving the backrest of concrete is used in various places to maintain soil and other materials in place. There are several different types of concrete retaining walls designed for different applications. The gravitational retaining wall is strong at the bottom and narrow at the top, while the counterattack wall is located above and below ground level. The walls of the concrete bracket have the same thickness from top to bottom and a very wide support base. Increased walls are similar to Counterfort, but the face in the opposite direction. The anchored concrete support walls are mechanically supported by Tethers. This type of wall is usually not more than 4 feet high (1.2 m) and is often used along the roads. Gravitational retaining walls have a dense base that angles up to the narrow peak. The angle side usually points outwards to prevent the structure from the under and the load. The thickness of the base of this structure is generally equal to one half of the height. This wall has a triangular shape and uses another underground position to support load. Backrest walls of concrete CounTerfort is suitable for heights higher than 25 feet (7.6 m). The overall design is similar to the console wall design, but generally cheaper construction. The underground position of the retaining wall for countermeasures usually provides excellent bending resistance.

The

cant support walls have the same thickness from top to bottom. This wall variant uses a wide track that extends towards the preservation of the soil. The base relies on the weight of retained soil for stability and wall strength. Consolled walls generally require less end .rete than other types and can be prefabricated or constructed on site. These concrete retaining walls are considered very strong and stable structures, but are usually quite expensive.

Bettal walls of concrete use a triangular design similar to Counterfort walls. The basic difference between the two structures is the direction in which the triangle is facing. From fixed soil area facing towards the direction ofout to avoid overturning during heavy loads. As with Counterfort, this structure is also an economic possibility of retaining walls.

anchored retaining walls maintain a uniform thickness from top to bottom and require no other supporting foundations. This wall relies on anchors built up deep into the retained soil for support. Anchors are usually constructed from concrete or some type of expandable material. Tethers are attached from the anchor to the support wall to hold the structure in place. This design is generally inappropriate for free or Sandy land.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?