What are the different types of home insulation?

There are many types of home insulation from which homeowners can choose. Are evaluated by the value of R or the ability to withstand heat; Insulation with higher R value is more resistant. Materials commonly found in insulation are glass fiber, cellulose and rock wool. There are a number of different types of home insulation, including: bats and blankets, free filling, plastic foams, rigid boards and reflective. Each of these types has its own advantages and disadvantages. It is fluffy, pink, cotton candy similar to materials with which most homeowners are familiar with houses. It is fire resistant and will not rot. The primary disadvantages are that it is not water resistant, so it can contribute to the humidity in the home and it seems that they also easily create homes. Slobra fibers are also irritating and should be installed by means of proper protective clothing, dust mask and eye protection.

Cellulosis insulate is a material resistant to a combination of treated recycled paper and wood.He gained popularity in the 1970s, when recycling was first introduced to the public. The best is best thrown into the existing walls or treated and poured into a sticky fabric, which can be sprayed on the interior of the new walls. In spraying it is not only insulation, but also sound material. Although it is still recommended to use protective equipment when working with cellulose, it has not been shown to have any unfavorable biological effects.

Rock wool, also called mineral wool, is made of slag, which is of dirt and limestone of the by -product of steel production. It is combined with chemicals and spins into the fiber. Like the glass fiber, it does not burn or rot. It has one main advantage over the pitch of the fiber, which is that it does not absorb moisture and therefore does not require the use of a barrierpiece installation. However, it shares an irritating nature of glass fibers.

The most common type is

from various types of home insulation, bats and atKrvýk. In conjunction with glass fibers, the most popular species used in homes is today. This can be found with an aluminum or cardboard in the direction or without facing any kind. Full -free launch is used primarily to increase existing insulation. This type of insulation is easy to install because it is already cut into standard widths, easy to cut with a commercial knife and can be easily stapled in place.

Home insulation with free refilling comes in bags or packs and is made of the same base material as Batts and blankets, but unlike Batts and blankets, the material does not turn into a feasible fabric. It is used in attic and walls and is intended to pour or blow this insulation. Barrier plastic foil should be installed before pouring the material, as the glass fiber absorbs water. If it is blown, the pneumatic device should be cleaned with the right fluff and location.

plastic foam is sprayed in place. Easily adapts to whatThe shape of the shape and remains in the place where it is sprayed, which means that it can permanently block specific areas of draft or moisture. It is most often used for new construction and placed throughout the house in walls, ceilings and foundation areas. It is resistant to rot and mold and can even add strength to the walls of the house. It is susceptible to insect infestation and care should be taken especially near the country where it seems that thermites are attracted to it.

The insulation of the home plate is made of a series of materials including asphalt-impregnated fiber slab, polystyrene, polyurethane and polyisocyanurate. It is flammable, so attention should be paid to working with boards. They are usually used in new construction or significant rehabilitation projects and can be used as cladding of a wall or roof, insulation under the inner walls or around foundations. Like bats and blankets, May panels sometimes have foils that reflect heat. As with plastic foam insulation, insects are infestation.

Reflective insulation is determinedENA for extremely hot climate. It is made of aluminum foil for heat blocking. It can be installed as one sheet or for maximum efficiency in multiple layers with space between them.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?