What are the different types of lawn trimmers?
Clippers on the lawn are a device used to cut grass, usually around the edge of the lawn or near objects that prevent the lawn mower from cutting grass. Sometimes known as Whackers Weed, Sheers on the lawn or lawns on the lawn, they come in two general varieties: gas trimmer and electric trimmer. Both varieties have a similar design: along the handle it contains finger control at one end and cutting mechanism on the other. The engine will be mounted on the upper part of the handle near the trigger finger.
If no engine is required, as is the case with electric trimmer, a socket that receives an extension cable will be located in the normally reserved position for the engine. The handle itself is usually designed for comfort and control and second -hand grip will be located about halfway along the long handle to further increase stability during use. The handle can be made of plastic or metal; Models of higher ends will contain strength parts.The handle itself is usually bent to orient the cutting head of the lawn trimmer parallel to the ground during cutting.
Some lawn trimmers have a plastic or composite pipe that is wound around the cutting head. The head turns quickly and the plastic line will swing out to cut the grass with which it comes into contact. Other grass cutters use plastic cutting teeth that tend to be more durable than a plastic line, but the replacement costs of such blades will be more expensive if they break. The blades can also unintentionally damage the objects that come into contact, such as tree trunks or towing. In general, the plastic line will not be strong enough to cause permanent damage, even if it can break some types of tiles or damage to tree trunks.
When the plastic line breaks or wear, it must be powered from the cutting head. ThisOlga make several ways, but the most common and convenient way to do it is to buy a lawn trimmer with a bumpy head. When the line is cut, the operator simply hit the cutting head on the ground and another line will be powered. This is comfortable, fast and easy, but the cut -off heads will be more expensive than other types of cuts that require manual feeding line.