What are the different types of climbing hardware?

Hardware climbing Climber will need, it will vary depending on the type of climbing. Some types of climbing require more hardware than other types, although almost all types of climbing require some similar mountaineering hardware such as rope, harness and specifically designed mountaineering. Specific mountaineering hardware can be designed for specific activity: for example, ice climbers will need ice screws, ice axes and ointments, while sports climbers will only need the most basic equipment. Boulders will require even fewer equipment and may not even need harness. Most climbers own several carabiners of different sizes. These metal loops have a spring or movable gate, which allows the rope to the center of the carabiner, abbreviated as "biner". Some weighters have a locking branuchcete -li from accidentally opening the gate during use. The size and shape of the carabiner will help determine its best use because smaller carabins are the bestFor certain types of anchors, while the larger ones are good for sure - or support - another mountaineer he passes from the rope.

Climbang Pro, which is short for protection, are pieces of mountaineering hardware that are set in cracks and slots in the rocks. These pieces often have a wire loop at the end, through which you can pass through the carabiner. The carabiner is connected to a piece of textile strap and another carabiner is connected to the other end of the strap. The climbing rope can go through this last carabiner, effectively creating an anchor for a climber. Protection comes in a wide range of shapes, sizes and functions; Nejjednodušší typy jsou ořechy, které jsou speciálně tvarované kovové nubyTo zapadá do malých trhlin. Larger cracks require larger climbing hardware called CAMS, which are loaded on the spring and activated the finger lever. These pieces of equipment can be infected when they are placed inside the crack, and then expand, jaHe is in position.

Ice climbers and mixed climbers - climbers who climb the rock and LED simultaneously - use a thin tube called icy screws to adjust the anchors. These ice screws are threaded so that they can be screwed into the ice, and the tip of the ice screw is usually sharp enough to penetrate the ice. The exposed end of the ice screw will have an opening that can be placed with the carabiner.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?