What are the different types of Sheetrock® repairs?
also known as plaster plates or plasterboard, the inner walls in most modern houses are made of Sheetrock®. As a result, the Sheetrock® repair is quite common. There are two basic types of repairs in the appearance of plasterboard. Small openings can be repaired by means of a compound or compound in conjunction with the patch. Larger repairs include removal of the damaged section and replacing it with a new piece of plasterboard. The United States of the United States, now a subsidiary of USG Corporation, invented a notice board for commercial production around 1916. Before this time, most of the inner walls used narrow horizontal wood strips called LATHS, which were covered with plaster layers. This process was laborious and correctly applied the expert's plaster. The invention of the plasterboard allowed faster and easier installation and simpler repairs and also helped prevent the fire from the room to the room.
Sheetrock® is a type of plaster made of plaster layer between two heavy outer paper pressyou. Most ceilings and inner walls use this type of plaster board. The paper layer on the outside is strong but still easily pierced. Kiln when penetration easily disintegrates the interior of the plaster. While plasterboard is relatively robust, the handle can easily cause damage.
The plasterboard compound, also called the joint compound or mud, is a strong material similar to plaster. This compound is used when hanging Sheetrock® to compensate for nail or screws and also connects to the seams of the leaves together. Using the plumage technique, the compound is applied in thin layers and usually lightly ground after each layer.
Very small holes, such as those that have left a nail or screw, usually easily repair the plasterboard compound. The compound layers are applied until the hole is sufficiently filled and smooth. The smoother the compound is to fix the repair, the lessGrinding will be required. To repair the Sheetrock® holes, which are more than 1 inch (2.54 cm), it is best to have some support for the compound. There are Sheetrock® repair sets that contain a compound, as well as a type of plasterboard patches, usually mesh or metal to smooth.
Larger Sheetrock® repair holes require a little more attention. In most cases, the section around the damaged space will be cut and the replacement part of Sheetrock® will be measured and cut for the place that needs repair. The new section is likely to need wood support that would help it safely. The edges of the spare piece are then leveled on the existing wall with a plasterboard compound, so that the smooth surface is ready for recovery.