What are the different types of wooden floors?
The beauty of wooden floors is undeniable. The natural color and cereal wood formula gives a feeling of heat and welcome in any room, whether the wood is laid in complex patterns or long boards. The choice of a wooden floor can be a challenge because wooden floors are categorized in several different ways.
The most common way describes the wooden floor is the type of wood used - for example, oak floors or maple flooring. Almost any type of wood can be used as a floor, although hard forests are the most durable. The hardness of the wood is measured by the scale of Janka, which refers to the Brazilian eben as the most difficult forests that are commonly used for the floor and pine as one of the finest. Oak, ash and maple are popular for wooden floor because both are hard and easily accessible.
The style in which the wood is laid is another way to describe the wooden floor. Wide boards of floors with thick boards cut out of protocols in different widths of the oldest style and some floors that takeThey do this, they are still used hundreds of years later. Ordinary board floor is made of long pieces of wood wider than three inches (7.6 cm), laid to provide a uniform look on the floor. Floor floors, made of shorter pieces about two and a quarter inches (5.7 cm) wide, today is the most common type of wooden floor. The parquet floor uses several types of wood laid to create a pattern.
The thickness of floorboards is another way to describe a wooden floor. The antique wide boards were usually very strong and lasted wear and rough use. Solid wood floor pieces are usually between 3/4 and 3/8 inches (1.9 and 0.95 cm). At the upper end, these floors can last for generations and be refined many times. The wood floor, also called the engineering wooden floor, has several thin layers of wood, usually three or five, glued together; the upper layer is usually a specialattractive wood. This is the least durable wooden floor, but is widely available and relatively cheap.
wooden floors can also be described by such a surface applied to the floor. The surface finishes, where the floor is first colored and then sealed with varnish, are the most traditional and least durable. These floors are usually waxed to provide additional protection, and can be re -colored and sealed when wearing. Today, penetrating finishes are popular. In fact, these finishes penetrate into wood and associate with it to provide long -lasting color and hard surface. Specially formulated cleaning agents are often needed to care for floors with this type of surface.