What are the veneer panels?

veneer panels are produced connection of a thin layer of veneer to a substrate that can be plywood, particle board or medium fiber density (MDF). The surface of the veneer can come from hard wood, such as oak, exotic wood, such as ebony or pink wood or fast -growing wood, such as the common, which has been colored to imitate hard wood or exotic wood. The veneer panels are available in different thicknesses, depending on the type of substrate. Double -fed veneer panels are flexible and can be used on curved surfaces. Suddenly, wooden veneer was usually thick about 1/4 inches (0.635 cm), but modern tools and procedures cut veneer, which is usually a thickness of 1/90 to 1/40 inch (0.028 to 0.064 cm). The veneer can be cut out of the protocol that is rotated or cut out of a flat surface of a large piece of wood called selitch. View of veneer panels. Ordinary veneer slices have a "cathedral" formula, while a quarter -sliced ​​veneer has unusual patterns, sometimes rays or stripes. When they are madeVeneh panels, veneer slices are arranged to create a special look.

In comparison of books, alternative leaves alternate from the same sewn, so the mirror images of the pattern are created through the face of veneer panels. Slip corresponding sheets are connected side by side of the sequence without rolling any of the leaves. Compared to the buttocks, veneer leaves are compared from top to bottom to create longer veneer panels. The leaves are usually inverted and create mirror images of the wood pattern.

One of the biggest problems with veneer panels is veneer control. Different types of wood absorb and release moisture at different speeds. It can produce evenly distributed cracks called controls, in the Bedanur surface. The control is less likely to occur if the veneer and the substrate are dried to the same moisture level before assembling the veneer panels and if they are cured in a controlled environment. VeneerThe panels should also be stored in a controlled environment, not in an uninhabited warehouse.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?