What are water heater straps?
water heaters are made to hold the water heater in place and prevent as much movement as possible in emergency situations such as earthquakes. For example, in California, water heater straps are required by law. Each unit must be effectively secured by water heater straps prescribed by law before any commercial or residential property can be sold or purchased. A popular type of water heater straps are tapes that can be completely wrapped around the unit because they provide greater immobility.
In the area of the susceptible earthquake, where there are mandatory water heaters, at least two straps are required for each unit. One must be placed approximately twelve inches (30.4 cm) from the top of the unit, while the other should be placed about eighteen inches (45.7 cm) from the bottom. If there is a space between the unit and the wall to which it is to be secured, the “rear spacers” of the Rap can be required before installation of the STP heater. Wood boards are sometimes usedThey do like backing backs.
If your home was built before 1990, check when your water heater was installed or it was replaced before 1990., installed before the law entered, the water heater straps may not be secured. Although no one will probably drop to check your water heater, if you are not selling your home, you should install straps of water heater to help you keep your home and family in an emergency in an emergency.
When you are there, check that the water heater has flexible gas and water, because these are also legally required and necessary for safety during the earthquake. Invalid lines can easily break only with the least movement of water heater. In an emergency, you should also turn off the gas to cut off. If you are not sure what parts and equipment you are, consider buying a restoring set that includes popRuhy heaters of water, clamps and other necessary installation hardware. The instructions are included and the installation is quite simple, so it should be able to most homeowners.