What is a carbide drill?

The carbide drill is made of high carbon steel with an extra hard and durable carbide coating on the tip. With this coating, the carbide drill is able to drill a hole in the masonry, stone and very hard steel without burning the tip of the drill bit up due to the huge amount of heat generated. The typical bit of carbide is best suited for use at low to medium high speeds, because heat is the largest enemy of this type of drill bit. For accurate cutting and drilling in a computer -supported cutting machine, which is often used with cooling fluid, carbide drill can be used to make many continuous cuts without replacing the bit, often the best selection because it is often the best choice because it is the best selection because it is well equipped with a piece. The excellent power of drill bit carbide allows the bit to chew very hard material without extending the hole. The softer drillter of carbon steel often cuts the surface of hard concrete and stone if enoughthe time to prevent the increasing edges of the drill bit; However, the finished hole will usually be in the shape of an egg due to a softer drilling piece moving around when trying to cut the material. On the contrary, the hardened carbide drill will not move because it is cut, which results in a much more rounded and truer hole.

The

carbide drill is a preferred tool for cutting slowly drilling and boredom that specializes in masonry and rock boring. Adding cooling fluid to the tip of the tool can also withstand high -speed use, including milling machines and cutting machines supported by computer. The durability of hard carbide cutting tools enables extended use on large cutting projects while retaining sharp, sharp edges on the finished cut. This is particularly important for accurate cutting tools used to complete the finished work.

on smaller cuttingThe tools such as tools with high -speed rotary type use the use of carbide cutter to make many small cuts at very high speed without burning the tip of the tool. In this type of tool, the tip is actually cooled by air when the drill bit rotates at speeds of up to 10,000 rpm. When used on softer materials such as aluminum and brass, one carbide drill can withstand indefinitely, provided that the bit is not forced to cut and suffer from the burnt tip.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?