What is a condensing boiler?
The condensing boiler is an effective type of boiler that has the ability to use latent heat of waste gases, especially water vapor, do more work. The use of this energy allows some condensing boiler to achieve an energy efficiency level of about 90% or more, compared to approximately 60-75% for conventional boilers. In order to capture this energy, the boiler must have additional heat exchangers, a device that extracts heat from one liquid and transfer it to another separate liquid. The extraction of this heat causes the water vapor to condense into liquid water, which must then be released. A person can often find out when a condensing boiler is used by a plastic closure for smoke and a visible white cloud that radiates from the chimney. Hot water can also be stored in the tank. When boilers cycle on fuel, such as oil, coal or gas, fuel is burned to convert water into steam. Excess gases, such as water vapor, can drift and escape from smoke. Instead of allowing thermal energy containedIn gases, the condenser boiler uses this heat for more work.
To capture this thermal energy, the condensing boiler uses extra heat exchangers to extraction of heat from waste gases. The latent heat from the gases is then used to warm up the water in the boiler. When heat is extracted from the gases, the water vapor condenses into liquid water. Since the gases become cooler and heavier during this process, the condensing boiler may require the fans to remove the waste gases and destroy them into the flue. The boiler may also need drain to remove acid condensate - water that condenses during the process.
There are usually three types of condensing boilers: combined boilers, system boilers and conventional boilers. Each of them has a slightly different design, but all usually share higher efficiency than other boilers. Combined boilers do not have a storage tank or rollers of hot water, and forThis requires less space. Water for this boiler is heated on request. On the other hand, both system boilers and conventional boilers have a water tank.
The system boiler has many of its components, such as hot water storage tanks located inside the unit. Therefore, there is no need for excess storage space. Regular condensing boilers are built in the same design as non -data boilers, but still have increased efficiency. Each of these boilers has advantages and disadvantages and each is best suited for different circumstances. A professional plumber is able to advise which boiler is best suited for the situation of the person and the needs of energy efficiency.