What is a flush tank?
The flushing tank is a tank that holds the fluid in the reserve for flushing. A classic example of the flushing tank is the tank attached to the toilet. Flowing tanks allow the storage and release of large volume of water. In addition to being used for toilets, they are sometimes connected to equipment that need to be cleaned by rin down and can be used to hold water tanks for dishwashers and similar types of equipment. When the tank is emptied, Ballcock immerses and opens the valve so that the water can enter the tank. When the tank is filled, Ballcock rises, eventually floats above the closure point and stops the flow of water. This allows the tank to fill in quickly and automatically. Some companies produce a dual tank that allow people to choose how much water is released for flushing. For the tasks of lighting light only One tank would be activated, while in difficult situations both tanks could empty. This saves water by reducing the amount of water used to flush light while providing enoughWater to fully clean the toilet after defecation. The tank can also be adjusted to change the amount of water it holds, which can be used as other measures to save water.
The most common problem that appears with the tank is the leak. Over time, covers and seals tend to reduce and change shape, which can allow some leakage. They can also crack. Solving leakage is important because it can generate a lot of unnecessary water. In addition, leaks can cause water to worry around the tank, potentially rot on the floor and causes other problems. Some signs that the leakage of the flushing tank belongs to the water around the tank and the sound of running water in the tank when it has not been flushed lately.
Repair Leaking Flush Tank, it will be necessary to avert the water supply to the tank; There is usually a shut -off valve near the tank. Then the tank should be released to clean it. At a dry tankI can be removed and replaced with a new one. Most of the hardware stores carry the basic tank fittings and these fittings are very general, so it should not be difficult to find the one that fits a particular tank.