What is a granite board?

homeowners and suppliers who install granite boards in kitchens, baths and bars often choose them for their beauty and durability. In order to maintain the integrity and appearance of this stone, we must use granite sealant for the board before use. This product protects granite from coloring, oil spots and water damage. Formulations available from retailers are liquids and waxes that can also be used to provide granite with an attractive shine. The color and structure of each piece of granite depends on the geological history of the place created by the stone. Unlike boards made of synthetic materials, granite is porous, with layers of open cells that absorb liquids. The quarries in different geographical areas produce granite varieties with different levels of pisses. It creates small cracks inside the plate and on its surface. These cracks may not be visible to the naked eye or reduce from the load -bearing or beauty of stone. However, after one installs granite plate, the cracks of the entrance points for dirt and Feb areIky that can damage the stone.

One has to choose what type of granite plate to be used to protect stone. One generally applies patterns based on water to the surface of the granite plate to form an outer barrier of oil and water. The penetration granite plate penetrates into the crystal layer into the crystal layer under the surface of the plate and creates an inner barrier that protects the granite integrity. Manufacturers produce penetration seals from various chemicals that have the properties of oil and water.

Before first use of one type of batch on the granite plate, it is important to assure it completely dry. If it is necessary to clean the surface of the granite before sealing with any liquid, you should wait 24 hours or more before applying the sealing gas. This allows the stone to release any moisture that it absorbed during cleaning.

you want to apply granite plate seals, one works on small sectionsInstead of coating the whole board at the same time. When the seal begins to dry out in the first section, apply the second coat to the same part. After waiting for the recommended manufacturer, one pounds and shines the first section before moving to the next board area. A trade rag or similar cloth is the only material needed to apply the seal and polish granite.