What is an extension of the hose?
Hose extension is used to extend the piece of hose in the engine. It can be a rubber hose or hydraulic version. For the intended use, the hose extension and connection material should be selected. The placement of an ordinary rubber type on the hydraulic hose will lead to an extension that will be enlarged, a bubble and a burst of high pressure created in the hydraulic system. The use of the incorrect type of extension of the rubber hose on the brake line will also lead to the brake system that fails. The hose is demolished instead of sending the pressure on the brakes unless the reinforced or knitted hose is used. If you place the hose extension on the line in the fuel injection system, a high -pressure hose must be used. A specific type of hose clamp must also be used to maintain on site. If it does not take one of these critical steps, it may result in a bubble hose out and explodes, or one that is literally pushed out of the montage due to terminal failure.
Often, when parts change into a car, the design may change. These changes often lead to the fact that the hose that fits perfectly than the change is too short to fit the new part. Many such parts come up with an extension of the hose and instructions for the correct installation procedure. If the hose has not been included, it is necessary to use the correct type to complete the installation.
Hydraulic hoses must be extended only with a steel -reinforced multi -layer version of the hydraulic type together with the right high -pressure printering terminals. The use of any other type of hose will lead to failure. Fuel hoses must not only be compatible with fuel system pressures, but must also be compatible with the type of gas used. Gasohol or E-85 The type of alcohol requires a special hose that will not be affected by alcohol.
Alcohol dries the rubber components of the fuel system and should be used with the fuel lineSpecific for alcohol. Extension of the hose that could work satisfactorily may fail in the wrong application. The power steering hoses are also high -pressure versions and any extension must be compatible with the steering system. Using the correct extension of the hose, the repair will work as well as the original part.