What is the protocol distributor?
Tree transfer to usable firewood can be a laborious process. First, the tree must be safely reduced, then the branches are cropped with a chain saw for mulching. The remaining tree trunk is then cut into managing segments for distribution into neighborhoods. Traditionally, this was the use of a heavy tool called Maul, which looks like a hammer combined with an ax. Each part of the protocol was placed on the stand and the forester would end the ax with the center. The pieces in half would then be divided into the neighborhoods and finally stacked on the spice, the aging process that allows the wood to dry for one year before the burning. The protocol distributor consists of a hydraulic or electric rod and a piston assembly, often rated by tonnes of pressure that it can generate. The higher the pressure evaluation, the stronger the Jeelogter Splitter. Most split models for home use have a rating of about 10 tons, but professional models can develop 25 tonnes of pressure or more. There are also manualDistribution of protocols that use the mechanical lever effect to enforce protocols through the sharpened blade assembly.
Thesplatter protocol can be powered by a gasoline or diesel engine, which is useful for distance work. The entire protocol hub is often released and the finished protocols are suitable for a waiting car or car. Models of wood are also promoted for all seasons. This type of protocol distributor is usually powered by electricity, so it is ideal for internal use in bad weather.
No matter what the power supply, the protocol distributor basically uses the piston to pass the protocol by a stationary blade. Some models have other pieces that prevent the fall of the divided protocolo. This allows the operator to quickly move the protocols for the second passage on the protocol splitter.
Although a good protocol distributor can save working hoursOperations with Maul, it is not possible for 100% safe. Only trained adults should operate the protocol distributor, because anything captured between the logo and the cleaved blade will receive at least 10 tonnes of pressure. The behavior of each protocol cannot be predicted, so the safety zone should be determined around the distributor. The helpers can pick up individual pieces of firewood, but should not stand near the split when it is in operation.