What is the porch?
When building a porch, it is important to support both the veranda floor and the porch covering the veranda - or more specifically several veranda. Post porch is a vertical beam that acts as a support of the veranda weight. Some porch posts can be hidden under the floor of the porch, while others are vertically extended to support the roof or cover; Such posts are often decorative, which means that they are painted, machined patterns or otherwise are made to look aesthetically pleasant. Post porch was traditionally made of wood or stone, but newer composite materials are now common. The advantages of synthetic contributions depend on the type of material from which it is obtained, but composite columns are usually less sensitive to rot, bending and fading in direct sunlight. Usually also do not require as much maintenance as a wooden contribution; Easy to clean with a hose and some soapy water. Because the porch column is often sunk into the ground or concrete gaming, it is susceptible to damagethe moisture of the ground. Composite contributions fight such damage by being more resistant to water than wood.
, however, wooden porch posts are easy to make, so they are a good choice for decorative posts. On the wide verales, wooden columns can add aesthetically a pleasant touch to the front of the house and can be painted to match the color scheme of the house. Such porches are usually used to hold a roof that covers the porch, although they can also be used as a railing support or for the porch itself. The porch wood columns must be maintained either by dyeing or resistant to weathering and should be replaced after several years when rot develops.
Much more expenditure visually pleasant alternative to composites and wood are stone porches. These are much heavier posts and it is difficult to install them properly but can add beauty to the pre -publicParts of the house and robust and long -term support of the porch. These supports are much less common than compound posts and wooden contributions, mainly because of the costs associated with their installation. They can also be machined for decorative purposes.