What is the pressure mounted?
pressure mounted gate is the style of safety gate for child protection, which uses external voltage to maintain its position. In general, it is constructed from two panels that slip parallel with each other, with rubber plugs that oppose the opposite walls. Once the gate is set to the desired width, it is ensured by a tensioning strip that exerts pressure on the wall or door frame on both sides and effectively holds the gate in place. This keeps a curious child or toddler contained in one area and limits access to dangers in other areas of the house. The use of a pressure mounted gate has many advantages over other types of gates, but they are not suitable in all situations. The installation is temporary and does not require any tools or hardware, so the gate can be moved from room to room to limit different areas at different times. The pressure gates are generally light and flat, so you travel or visit relatives with you; Some even come with a special case fortransport. They are relatively cheap and because they can be moved from room to room, they can save money on installing gates at each door in the house. Also, it does not damage the walls if they are properly mounted because there is no hardware.
The main disadvantage of the gate mounted on pressure is that it can relax if the child leans or pushes on it. This represents the risk of injury, if the gate falls on the child, but the greater the fact that once the gate is down, the child has free access to possible dangers. The gate mounted by pressure should never be used at the top of the staircase; If the gate is released under the weight of the child, both could knock down the stairs, resulting in serious injuries. Another limitation of the pressure mounted on the pressure is that it can be used by the use of areas where there are two flat surfaces directly against each other, such as doors. If the subordinate gate at an angle must be installed, it should be usedAnother type of gate, such as the hardware gate designed for an angle.
Before selecting the Baby Safety Gate, parents should carefully consider the location and the situation where the gate is used. The pressure mounted gate is ideal for temporarily blocking a particular area at a certain time, as it is to maintain a crawling baby from the kitchen while cooking. Always read before using any type of gate for the safety of the child and follow the manufacturers' instructions. Most gateway manufacturers recommend that you remove the gate completely when the child is large enough to try to climb it.