What is a radon pump?
Radon pump or radon relief fan is a gas extraction device designed to reduce the radon gas level in buildings at an acceptable or approved level. Radon gas is a by -product of a radioactive decay of uranium in the soil and is a known cause of cancer. Radon pumps reduce the levels of radon gas in air extraction buildings from the areas of radon gas penetration and venting into the atmosphere. These extraction pumps are usually sealed, the units of the rotary extraction fan installed inside or outside the building with a point of discharge above the roof level.
Radon is colorless, odorless and tasteless, which is the result of a natural disintegration of uranium into radium. These elements naturally occur in all soils at different concentrations. The by -product of the radon gas of this process of disintegration is constantly released from the soil and in open areas is no direct health risks. It is when the gas is left to collect and exceed certain levels KONcentration, will become a serious health fears. There are several ways to ensure that radon levels are kept under control, the radon pump is one of the most effective and effective.
Radon alleviation measures have become the main problem in recent years and the installation of the radon pump system is now mandatory in many areas. Radon pumps usually attract air under the floor of the lowest points in the building. These areas include climbing areas and basements and usually represent the first area of radon gas input. The exhaust from the pump is then directed from the building and venting above the roof, where it is unlikely to be drawn back into the interior.
Radon pump is usually a separately closed seal unit with resistant in weather external installation. Although most are evaluated for external use, many units are installedWell in interior places such as attic garages and wardrobes. However, this arranageneration is not always practical because of continuous noise running. The pump pipe is directed to the basement sump, where it generally passes through the sump cover along with any plumbing bail. To maintain the integrity of the system, all joints are in the intake and drain pipes and the entrance to the pump and sump cover.
Before selecting a radon pump, tests should be carried out to determine the levels of contamination and a professional assessment to define the size of the desired system. There are several (DIY) radon test sets that require exposed test material to be presented to laboratory for analysis. The best approach is generally to hire a professional for performing tests and evaluation.