What is a ringing washing machine?
Wringer, or ringing washing machine, is the forerunner of a modern washing machine. The typical ringing pad was introduced in the first years of the 20th century, belonging to the washing, a simple agitated system reached in VAT and a combination of sink and ringing. He considered this type of clothing pad to be innovative equipment and for many households the process of cleaning clothing was much easier.
The appearance of the ringing pad represented a body that was composed of VAT mounted on four legs. Many models included rollers or wheels on each leg, allowing you to move the pad from the storage if necessary. The built -in VAT has been built into a simple agitation device located in the middle area. The agitator usually had two extended flaps that would move clothes during operation. At the base of the machine there was a drainage valve that made it possible to remove water from VAT as soon as the sketch process was completed.
Soon the ringing washing machine also included useful tools that were connected to the top of the VAT, usually on one side. The robust sink provided an ideal place to scrub stubborn stains on shirts and other garments than immersed in the washing water. In order to induce as much water from the clothes as possible before hanging them on the outdoor cord, a Wringer composed of two robust rollers and crank handles were provided. After the clothing was washed, he passed the rollers and effectively pushed excess water that dropped back to VAT.
Original designs for a ringing pad used newly used electricity. One power cord with the equipped wall took place from the pad to the energy source. Once the VAT was filled and the clothes were immersed in the water, the soap washed and the device was on. The agitator moved clothes back and forth in the filled VAT and helped remove dirt and dirt from the clothes.
Later designs mechanized Wringers and eliminated hand handle. By the fact thatThe switch switch could be initiated by the ringing movement and passing through wet clothing with relative ease. Due to some accidents concerning electrical cylinders, the guard was added to the last generation of these types of the subsoil.
The drain water from the ringing pad included the opening of the outflow located near the unit base. Many models include accessories where the hose could be attached, allowing control of the water flow when it has left VAT. Other models have been set to run water into a bucket, which could then be thrown into the sink or from the door.
6 However, this is possible to buy a replica of the Ringer pad from several selected suppliers. Replicas are fully operating equipment for cleaning clothing and can be ideal for use in the lake cabin or in another place where the installation or limitation of the universe makes the installation of modern clothing pads.