What is shine?

Svipit shine is highly glossy, usually applied to military boots. The soldier is sometimes assessed by the quality of spitting the shine on his shoes. Ideally, the gloss occurred to the surface so shiny that it becomes a reflection. Giving Boots perfect spitting of gloss is a connected process that takes hours. Although there are "rapid repairs" that approach the appearance of spitting gloss, those used for uniform inspection can easily find out the difference. Regular Kiwi Polish or similar brand will perform this work. For certain parts of the process, additional tools such as cotton balls, a solid brush or a soft brush can be useful. The trick to perfect spitting gloss is thorough and takes time at every step. Each part of the shoes must be Cleaned: feet, laces, tongues, etc. Any dirt, dust or old shoe lacquer from preventing the perfect gloss of spitting. In this step, a cleaning brush or a stiff brush can be used.

Furthermore, a thick layer of polishes is applied to the shoe and matured carefully. The usual method is to stretch a slightly worn but clean cotton cloth over the index finger, make sure it is perfectly smooth over the finger and damp but not drip. Some people prefer cotton balls over the fabric, but under no circumstances should a polyester be used. Again, the key thoroughness is. After a thick base layer is applied, thinner layers of the polish are built and wake up until the perfect shine appears.

Svipit gloss takes its name from the moisture desired on the polish. This moisture repels the wax lacquer and make sure that it follows rather than a cloth. While some people use spitting, others use water or friction of alcohol. Some recommend using spitting while others swear. In any case, do not use spitting to radiate shoes if you drink a beer or soda or have been eating recently.

During the gloss, the shine will first look milky, which learns that a high shine appears. Patience and elbow fat are required. Once enough layers of shoes and shoe layers are applied to the mirror surface, the work can be completed in many ways, such as the last climbing with a soft cloth or brush.

combat boots with a beautiful gloss of spitting are often the result of years of careful treatment. Touching does not have to be as thorough as the first application, but sometimes the shoes can be completely free of the old varnish and the process must start fresh. If an old lacquer has scratches or large damage in only one area, it can be melted and smoothed with mineral oil and new varnish can be used in its place. In the military tradition of the United States, battle boots are regularly deprived of old Polish, while in the UK and Australia it is traditional for soldiers to allow Polish to build over time.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?