What is the solenoid washing machine?

6 The water that comes to the washing machine is controlled by solenoid washing machine. This mechanism responds to the settings controlled by the user, allowing the appropriate amount of hot and cold water to enter the machine during the cycle.

During the installation, the washing machine is connected to both cold and hot water lines. Once the machine is in place, the taps for these water pipes are open and left to normal operation. Each line connects to the input side of the valve assembly, which contains a solenoid of the washing machine. The valve set has one output that brings water to the bathtub if the washing machine is. When the washing cycle requires cold water, the solenoid of the washing machine opens the cold valve and the cold water flows into the pad. If the washing cycle requires hot water, the solenoid of the washing machine will open the hot valve instead and flows hot water from the entrance pipe into the mat. When the cycle requires warm, the solenoid of the washing machine opens both valves and a mixture of hot and cold at the same time enters the bath.

The washing machine is operated by an electrical signal from the machine. This signal is sent by a machine in response to events in its programming, which indicates that it is time to add water. After the solenoid receives a message to open the valve, it gives a suitable valve of the physical pressure that causes its opening. When it is time for the valve to close, the solenoid closes it again.

Sometimes the washing machine does not send the correct temperature water to the bath or does not send at all. This can be an indicator of several possible problems. The best option is that the water is turned off on the tap. If both taps are turned on, but the water still does not flow properly, the problem is most likely a solenoid washing machine. One or both valves may not open when it should or remains open when it should be closed, indicating the likelihood that solenoid needs to be replaced.