What is the attic barrier?
The attic barrier is working to reduce the heat that your home gets from the sun in the summer. By reducing heat in the attic, you can reduce the accounts for the service. The attic barriers work by reflecting the sun's rays and sending them back to the sky. Without a vibrant barrier, the heat would remain in your attic and warm the whole home.
The barrier consists of substrate material. This is often kraft paper, cardboard, plywood or plastic film. If it is a particularly thin material, fiber reinforcements are often added to make handling easier. A reflective material such as aluminum foil is added on one or both sides of the substrate.
Installation of the attic barrier can be a simple project Do-it-YourSelf and is relatively cheap if it is done. If you build a new building, the addition of attic is often very cheap. It will come to the supplier and install the radiant barrier in an existing house can be expenditure but depending on the design of your home and how much difficulty it will haveup to the area.
There are several ways to install attic barriers. The best is often determined by how much space you have in the attic and whether it is a new home or a conversion project. No matter how the barrier is installed, there is one important factor to keep in mind. If your bright barrier reflects only on one side, this side must point to the top of the house. Otherwise, the attic barrier will be ineffective.
Many people who complete this project themselves prefer to put a radiant barrier directly to the top of the existing insulation. It is an easy effective way of installing the attic barrier. The attic barrier can also be connected to the bottom of the rafter framing. With the new construction of the houses, the attic barrier can be applied directly under the roof deck or on top of the rafted roof deck.
If you decide to install a barrier on your own, there are someErá important safety measures that you need to keep in mind. While radiant barriers seem to be more harmless than insulation, it is still important to wear protective equipment when working with a barrier. Your protective devices should include covers for your eyes and gloves.
When installing the barrier, be careful where you connect. The attic is full of wiring and you do not want the wrong clamp. Also, if you have canned or recessed lights, you work carefully around their housing in the attic. It is also important to be careful when you move the attic. Carefully step to the beams and trusses.
Always make sure you have sufficient lighting and ventilation. The last advice for safe installation of the attic barrier is never to work alone. Having a partner in the attic help will be the work safer and more pleasant.