What is the Board and Batten siding?
Board and batten siding are often called board and batt or barn. It is a kind of rustic wood cladding, which often occurs in rural areas in rural houses, barns and other extensions. Batten siding and siding consist of wide boards laid vertically with narrower wood strips called battens, covering gaps. It is assumed that this type of siding was established in Sweden and Norway and in the mid -19th century it became popular in North America. On average, they are often about eight inches (20 centimeters). However, they can be as wide as twelve inches (30.5 centimeters) and narrowly as six inches (15 centimeters). The thickness of these boards is usually not dense less than one inch (2.5 centimeters), because thinner plates usually do not hold elements.
When the boards are attached to the side of the building, there is a gap around one inch (2.5 centimeters). These gaps are then covered with narrow strips of wood called battens. Depending on the width of the boards used for the board andThe width of the Labs may vary in the tiles. Wider boards will often have wider gaps between them that can cover the ropes of up to four inches (10 centimeters) wide. On the other hand, narrower boards usually have smaller gaps with each other and these gaps are covered with shoes as narrow as 3/4 inches (2 centimeters).
While a number of different forests are used for a board and tiling, Cedar seems to be one of the most popular options. The reason is that Cedar has natural disintegration resistance and is therefore extremely durable. Other popular wood options for the board and tiles include Topol, Pine, Oak and Hemlock.
Regardless of the type of wood used for the plate and Batten towing, it will have to be treated to help endure the elements. Although the wood is very resistant, it can be prone to rot and decay. To prevent this from preventing water repellent, dyeing or painting it is highly recommended.
Maintenance for wood cladding also differs from other types of tiles such as brick or h tilingLine lining. Unlike other external tiles, wood must generally be retreated, re -colored or redrawn every five to seven years. In a wetter climate, this may be necessary more often. Board and Batten sidings should be checked at least a year for any damaged, divided or rotten boards. To prevent further damage, these boards should be replaced as soon as possible.