What is the correct maintenance of sprayers?

Home sprinkler maintenance is a relatively simple process, because there are very few things that the owner of the house must do to ensure that they work properly. With some simple winter and spring checks, the sprinkler system can be an easy way to irrigate the domestic. The water that goes into the system must be turned off in the main valve. Automatic irrigation controls should be taken to set the rain. Each of the valves on the sprinklers themselves should be turned on to release the pressure in the pipeline and pull out the water. All water must be drained to prevent frost in the pipeline, which could cause serious damage to the system.

When the freezing point is in the season, sprinklers can be triggered in spring. The system must be rinsed to make sure that any pests who have made winter houses in the drove are gone. The nozzles should be removed to provide an open flushing opening. Start water for a minute or two to make sure they are out of ODS pipetracted all harassment.

After the pipes have been rinsed once, replace the nozzles and run the system up. If no nozzles run, they can be replaced or cleaned. If there is a calcium accumulation on the nozzle, it can be cleaned using a standard calcium remover product. If any valves appear to leak, they must also be replaced or repaired by a suitable pipe glue.

The controller must be checked as the last part of the spring sprayer maintenance. The batteries should be replaced even if it does not seem dead. If it is a charging system or has no battery system, simply monitor the controls to make sure they work properly.

In addition to these two main parts of the sprinkler maintenance, there are Few things that may require attention. The head seems to sometimes spray in the wrong direction. Usually it's just a matter of turning the head. If it does not help the situation,when the overgrowth may be to blame or obstacle, such as the deposit of a rock or soil. If the area is cleaned and the head of the spraying intestine still does not work properly, it may need to be replaced.

Sometimes there may be problems in the pipes themselves or in the water source. Pipe leaks can be fixed with pipes and glue with polyvinyl chloride (PVC). If the heads and nozzles appear to be constantly damaged, high water pressure can be blamed. If this is the case, special valves can be installed to reduce the water pressure.

Sprinkler maintenance is a relatively simple process that includes replacement and repair as needed. Any owners of the Sprinkler system who are unpleasantly handling these repairs can hire a professional who will take care of them. Many sprinkler companies offer annual maintenance routine for a fee that makes events such as spring start-up for owners trouble-free event.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?