What is stucco?

trim and accent pieces built from stucco foam add personal touch to a stucco house without specialized tools or knowledge of the stucco needed for installation. It forms stucco foams begins with an inner support structure with wire mesh, which could be made of glass or steel wire mesh. The rigid foam covers the support structure and adds shape to the wire net. The stucco of a similar coating causes foam match of stucco. Proper installation and protection ensure that a piece of installed stucco foam remains in place and sound for its designed life expectancy.

The use of stucco foam does not require any specialized concrete fasteners. The design adhesive applied to flat mounting surfaces - located on the unfinished side of the foam - provides a structural connection approved even for the strictest hurricane codes. A stuck piece of foam will require support until adhesive medicines for the time designated by the adhesive manufacturer on the structure. Unprotected Stucco foam requires protection against moisture, ZATadhesive drugs to ensure that the foam material is not saturated. The water saturation inhibits the structural adhesive from binding to foam and causes some types of stucco foam to fall apart. Permanent protection requires the application of external color. The interior colors disintegrate when they are exposed to moisture and ultraviolet (UV) light. The outer color of the oil -based oil with the protective environment prevents moisture from damaging the stucco foam.

As well as natural stucco, routine color control covering the material ensures the greatest life expectancy. Chipped color or deep scratches in color Remove the ability to protect colors. Early damage detection ensures that the upper coating Fojsem intact. If the top layer fails, the foam loses its stucco appearance and requires replacement. Removal of damaged stucco foam damages natural and synthetic stucco because the structural adhesive used to install foam interrupts inAzbu between stucco and structural material that holds stucco into the house.

Proper care and maintenance will keep stucco foam structurally healthy and look good for the life of the house. If there is less damage to the persecution or reduction, the authorized repair company should be contacted to repair and accelerate the foam. The longer the damage remains exposed to the elements, the more damage that the inner wire support structure occurs. When the support structure fails, the foam lining will need to replace it before the water interferes with the stucco applied to the house.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?