What is the lighting of the track?

Lighting monitoring is an alternative to traditional cable lamps and fixed recessed lighting designs. Most systems use the length of exposed electrical cables hidden inside a plastic or aluminum pathway that can be connected directly to existing circuits or connected to wall -mounted wall sockets. After the track was mounted on the wall or ceiling, there may be a separate lamp set and the sockets to surprise anywhere along the track itself. The metal boards in the socket made contact with the loaded connection in the trail, which in turn activates the bulb.

This type of lighting is very useful in situations where traditional lighting is problematic. It can be very effective for the isolation of a work of art or other prominent design element. Several pinspot lamps can be installed in one track and directed in any number of directions. Traditional reflectors can take up valuable space on a mantle or table, and the backlit effect from below is often disgusting. Follow -upThe decline allows the suspended headlights and reflectors to be suspended from the ceiling or upper walls.

Some domestic renonation also consider the solution of lighting for older houses to be complex, and instead of trying to install new cabling in the old ceiling, decorators can instead use surface tracking lighting. Manufacturers offer a number of decorative lamps and extensions to work with bases. The main trick when working with this type of system is to know which of the three basic models of tracks was installed. This information should be listed somewhere in the manual for instructions included with lamps and tracks. Some systems use a two -wire connector, while others use a three -wire grounded system or a wider two -wire connection. No other design is suitable for one type of tracks.

Another important aspect is to useThere are a standard line voltage of 120 volts to supply high -current bulbs, while others have a low voltage system that uses the transformer to reduce the current from 120 volts to approximately 12 volts. Both systems should never be confused-the electrical bulb located in the line voltage system could cause a serious electric fire. Most decorative lighting designs, such as pinspots, use low -voltage systems, but functional can use 120 volts and 75 watts. The low -voltage lighting transformer may or may not be obvious, so it is always the safest for homeowners to replace blown bulbs with those who have the same power and purpose.