What is water aeration?

Water aeration is the process of introducing air into the aquatic body to increase its oxygen saturation. Oxygen is an important part of water quality and its ability to maintain life. Water aeration can be done in different ways. Some commonly used methods include air forcing with aeration pipes, use of fountains to spray water into the air and the use of aeration equipment driven by wind. This oxygen uses live creatures in the body of water such as fish and other aquatic animals. It is also used by aerobic bacteria to remove organic pollution from the body of water. When the level of melted oxygen in the pond, lake or other water body is maintained at a high level, water is able to support life. If this saturation is exhausted by oxygen, whether through pollution or stagnation, the water formation of anoxic and unsuitable for fish or other water life.

Many peopleIt is familiar with at least one common example of aeration of water, the air pump of the aquarium. Using a pump, aeration hose and diffuser aeration system of the aquarium forces fresh air into the tube. The air in the tube is then directed to the bottom of the aquarium and forced to the diffuser. The diffuser produces thousands of small bubbles that push deoxygenated water at the bottom of the aquarium at the top, where it comes into contact with the atmosphere. After reaching the surface, this water releases the stored harmful gases and takes oxygen.

The

aquarial aeration system is an example of aeration of water on a small scale. The basic principle applies despite the size of the aerated body of the water. In larger water bodies, the aeration tube can be replaced by larger aeration hoses and diffusers can bring coarser air bubbles, but the same concept is Applied. In some cases, air pumps driven electric or gas are used to create the necessary air pressure while other applications can use inSetting aeration pump to push air into lower water levels.

aeration can also be performed by enforcing water into the air. The pump is located at the lower level of the water body and connected to the hose. This hose is located on the water surface or is connected to an ornamental fountain. When the pump is activated, the water is pushed through the hose and into the air. The gas and oxygen replacement takes place in the air before the water falls back into the pond. Although this method results in greater water loss through evaporation, it is commonly observed in decorative gold fish ponds and other decorative water formations.