What should I consider when buying a mast?

Shopping a stem may seem like an easy task, but in fact there are many options that carry consideration. The material that is made of its height, its easy use, and even its final placement should be all factors in performing the best purchase. First there are two basic types of masts: land flags and wall mounts. It is either built -in permanently into the ground, or a permanent cement base holds a sleeve for a rod that can be removed. These masts are used commercially and privately. The glass fiber pole is made to bend with the wind for a dramatic effect. They are most commonly seen at commercial sites, such as industrial parks or car dealers. Glass fiber -fibers do not have to fly national flags, but rather colored "wind flags" for the flag and logo of the company.

residential ground flags are usually aluminum, resistant to rust and weather and have a small wind. Are also available in various baked enamelled surfacesCHACKMENTS, including white, bronze and other optional coatings. The thickness of the mast wall should increase with height to withstand the wind. If your national environment is known for high winds, you want to invest in a stronger wall.

There are sections poles and binoculars poles. Both are aptly named after their appropriate proposals. Section masts are assembled by slipping each section into the next, with locking buttons that capture each piece in place. This type of pole is used to raise and reduce the flag of halyard or rope.

telescopic soil expands, one part from the other, like a telescope. The upper part narrows from the base. One of the advantages of this design is that it does not use halyard or ropes to increase and reduce the flag. There are no lines that twist, turn or replace.

flag Je attached to a built -in not subject to harness at the highest end of the telescopic mast. This type of pole also supports the second flag in half the mast. To reduce the flag, you simply allow the mast to slowly slide down into its farthest sleeves. To reduce movement, these masts are made with smooth, weather -resistant, enamelled surface.

Wall mounting flagpoles: wall mounting can be hung from your house, balcony, building or ship. The most important aspect is the length. The pole should be long enough for the flag to have no flap against shrubs, wood, windows, equipment or other obstacles. If the flag can hit nearby objects, it will significantly shorten his life.

Montts comes in many designs for countless applications. The deck mounts can be vertical for mounting on the surface of the deck or horizontal board for mounting on the corner of the railing or wall. Outrigger Houses can accommodate various cruise applications. Folders to stThey are supplied in standard lengths of 5 to 8 feet (1.5 to 2.5 meters), although different sizes can be available.

To match the size of the flag to your pole, consider that the length of the flag should be about one third to a quarter of the pole length. For example, a land mast of 15 to 20 feet (4.5 to 6 meters) would fly 3x5 '(1x1.5 m). Crown decorations to the top of the mast are optional, although some poles come with a gold decoration or eagle.