What should I consider when installing an increased floor?
Increased floor is used in various applications when there is a necessary access to the pipe that runs under the floor. Usually the floor system consists of a series of tiles laid in a grid supported columns and rays. Increased floor is often used in data centers so that cabling can be carried out under easily raised floor panels. Some houses are also sold with heating and cooling systems built under a raised floor. Not only is it more efficient, but it is much easier to operate these systems if necessary. When installing a raised floor, several things should be taken into account to consider whether this is suitable for the intended application.
Most raised floors are installed in the structures as they are built. Because elevated floors can be up to 18 inches (45 centimeters), the installation of an elevated floor can very drastically change the height of the ceiling. In a room where the ceilings are high, as is usually the office and data centers, it may not be a problem.But if you are considering an increased floor for your home, you may want to take it into account.
Increased floor also accumulates dust and contaminants, which is a source of difficulty for many data centers. The same properties that cause attractive lifting of the floor are also subject to dust collection, as easily raised panels allow filtering of the materials below. This may mean that access to lines, cabling or pipes under a raised floor is a chaotic effort.
Increased floors must be supported by numerous pedestals and it is important to ensure that the pedestals are properly installed to support the floor. Especially when the floor carries heavy loads, make sure that no floor panels are endangered, and if it is necessary to cut holes in the floor for cables, make sure the cut tiles are properly supported with other pedestals.
especially when using an increased floor to cover a large amountCaution should be careful. The first is that it is recommended to use non -conductive material for the floor. In the case of an electric short or other problem, this prevents the floor from damaging people or other equipment. In addition, the floor should be resistant to fire for the same reason. It is also recommended to ground the metal frame of the floor.
Increased floors are an excellent tool if necessary, and it has been found to be needed to ensure that it is needed to ensure that it will work with a renowned supplier. Ask for an estimate of the total cost and time of the floor construction and see if the work of the floor or supplier is guaranteed. Depending on the type of materials is done under the floor, you may want to work with a plumber or heating and cooling to coordinate the work of suppliers in the most effective way.