When should you replace the wheel string?
The
bike string is a central part of the drive tract, so it is important to replace it when worn. There is no limit of mileage on cycling chains, but there are several common indicators that it is time to replace the wheel chain, the most important thing is to stretch. Environmental factors also play a role in how often a cyclist must replace the wheel chain. If the bike chain is particularly worn or you have been cycling for a long time without the maintenance of the chain, it may be necessary to replace other bike components.
No set mileage
There are many disputes about how long the chain can take, but most agree that a well -maintained chain can take at least 1,000 miles (about 1 609 km). The environment that the bike is playing is playing a big role in how long the chain can last. Chains riding in a bold or wet environment tend to wear faster than others, although proper maintenance can cause to last lengthe. You can usually get a good idea of how often you have to replace the string on the bike by maintaining a mileage recording between replacements.
Signals
One of the main warning signals that it is time to replace the wheel string is that the chain begins to slip when you put pressure on the pedals. Other indicators that you may need to replace the string of the wheels, may be sloppy or slow shift; Incorrect shifts in which the string does not move to the device you want to move; Or drop the chain - which occurs when the string jumps from the front chain and landing either on the frame or outside the remote side of the crank set.
Control of stretching
If your bike string begins to show signs of wear, you should check the string to see if it is outstretched. This happens when the pins hold the links chain. You can check itt using a chain breakup or only with a ruler. If you want to do it with a ruler, you should hold a ruler over a zero mark in the middle of one of the pins. Then look 12 pins - it should sort the thumb mark on the ruler of Imperial Units. If the center of the pin is more than 1/16 inches (about 1.58 mm) around the mark, you should consider changing the chain; And if it is more than 1/8 inches (about 3.17 mm), you should certainly replace it.
Replacing other parts
If you have been cycling for a long time without checking the wheel chain, or if the chain is particularly worn, you should also check other parts of the driveway to make sure they are still fine. If you put a new wheel chain on a very worn driveway, you can still encounter moving problems. Since gears and string are to work unisonRemids to gears. In addition, old gears can wear a new chain faster than it should. However, if you replace your chain regularly, the cassette and chains or freewheel should last much longer than the average chain.