How can I choose the best subwoofer amplifier?
AMP Subwoofer or amplifier increases the sound signal until it is loud enough to be made by a subwoofer. They are used with passive subwoofers because they do not have built -in amplifiers. By selecting the right subwoofer amplifier for the audio system, you can ensure that the subwoofer can play the sound clearly and loud without damaging the subwoofer or amplifier. If you want to select the right type, you must match the technical specifications of the subwoofer amplifier, consider its function and choose which one is suitable for installation. RMS Wattage represents a lot of energy or volume - in Watts - which subwoofer requires for operation. If you want to get the most volumes from the subwoofer, select the amplifier with the corresponding amount of RMSD, suboofer. The impedance that is defined in Ohms represents the amount of resistance in the system. When the amplifier impedance corresponds to the subwoofer impedance, you will be able to maximize the amount of volume in your sound system.
While some subwoofer amplifiers are designed specifically for subwoofers, others are designed for full speaker systems. The Mono or Stereo Subwoofer amplifiers can be used with up to two subwoofers, while multi -channel amplifiers with a specified subwoofer output are used with at least one subwoofer and other speaker components such as medium and tweets or spatial sound speakers. Before selecting the amplifier, determine how many speakers you need to connect to choose one with the appropriate number of outputs.
By selecting an amplifier with connectors that match those on the subwoofer, you can easily install a subwoofer and smash amplifier to buy adapters or special cables. This reduces the number of components in the sound system. Some connectors used by subwoofers and amplifiers include banana; Tip, ring, sleeve (TRS); and speakers cables. If you cannot find an amplifier with the correspondingConnectors, use adapters or adapter cables to connect the subwoofer to AMP.
Some subwoofer amplifiers provide special features such as built -in crossover and equalization (EQ) or Bass Boost. The crossover divides the audio signal into separate frequency belts - such as high and low or high, medium and low - and allows you to send these signals to appropriate speakers. You may want to opt for a subwoofer amplifier with built -in crossing if your subwoofer or receiver does not contain crossover. Sending only low frequencies to the subwoofer via crossover ensures that it reproduces only the low frequencies that has been designed for handling. If you want to condition the audio signal to make it sound better or more bass-heavy, select the subwoofer amplifier with the on-board ECV.
different types of subwoofer amplifiers exist for domestic, professional and automobile sound markets. The main differences between these AMPs include size, cost and accuracy. AMPS for AudiCars are usually smaller than other types, because they must fit into smaller spaces, while amplifiers for home sound and professional use are usually dimensioned to fit in home cinema stands or standard music stands. Professional amplifiers usually cost more than other types because they are designed to reproduce sound with greater accuracy and minimal distortion. In general, you can use any type of subwoofer amplifier with a subwoofer if its technical specifications correspond to the subwoofer specifications.