How do I install a TV tuner?

6 There are two main types of TV tuners: Internal cards that connect to peripheral components of the PCI on the computer and external cards that connect to the Universal Serial BUS (USB) on the outside of the system. Regardless of the connection type, the process for installing a TV tuner should not take more than 15 to 20 minutes. On the other hand, the installation of the internal tuner will require the Phillips-head screwdriver to open the computer's case and install the card in the PCI slot on the motherboard. In addition, you should have an electrostatic discharge strap to prevent static electricity in damage to the internal computer of the computer.

The TV tuner installation process is relatively simple; Simply connect the USB tuner card to any available USB ports on your computer. When the card is inserted, a message usually appears on the screen to report that a new hardware has been detected in the systeme. Insert the installation CD or DVD that came up with your TV tuner card and follow the specific instructions that were supplied with your individual card model. This usually includes accepting a license agreement for the software program and the selection of a hard disk where you want to install the program. After that is done, restart the computer and complete the installation.

If you want to install the TV tuner on an external card, turn the computer to turn the computer via the Operating System options. Once the computer is off, disconnect the power cord from the back of the computer and remove the screws on the back of the right HA side of the computer case. Unload the side panel and expose the motherboard. Locate the available PCI slot; These are horizontal slots that run along the lower half of the base plate towards the rear of the housing.

Once you find the available PCI slot, insert the tab firmly and press with both hands until it is locked in the position. Screwhole on the tab is perfectly equal to the opening at the back of Pouzdra. Screw the card to the position to secure it and close the computer's case. Reboot the computer and follow the installation instructions for your tuner card - as well as installing the software on an external TV tuner - completing the installation.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?