How does a cigar hygrometer work?

The

Hygrometer of Cigan can work in different ways, but the two most common types use synthetic hair or two separate metal plates that use water to produce electricity, to control when the humidifier turns on and off. Humidor is a component in most cigars that keep the level of moisture inside a closed structure on optimal levels that allow the cigars to maintain their original air dried taste. One common problem associated with cigars is that they dry very easily, which changes their taste and smoothness. Humidor ensures that the cigar is fresh and the cigar hygrometer acts as a switch on and off for mechanisms that work a specific humidifier.

One of the most basic types of available humidifiers is the analog type. The cigar hygrometer works in these applications by applying a scientific concept to the basic humidifier. Science showed that hair, synthetic orThe real, when it dries, takes moisture from the air to increase its moisture content. In humans and animals, this allows hair growth properly by causing them to extend. An analog cigarette hygrometer uses this phenomenon by having a type of synthetic hair wrapped around the bottom of the spring of the loaded switch. As the hair dry out and begins to deal with moisture, it extends, which activates the spring switch to the open. After the moisture levels in the hair rise to the maximum heights of the set, the hair begins to dry again and shut down. This cycle, while continuing until the humidifier is used, or until the parts are worn and replaced.

The second type of humor used, which is most commonly found in special retail stores around the world, is digital diversity. The digital cigar hygrometer works so that it has two metal pieces located separately, but still by connecting and using the main water as a electrical conductor. These metal pieces are namOnt to a silicon plate where the wires connect the battery to a computer chip that stores programmed information. If the set level of the humidity is required, the chip will be set to the specified level and when the humidity needs to increase, they fall on the silicone plate of water droplets. The more water is present on the board, the higher the moisture levels will increase. Once the level of moisture is reached, the water stops falling on the board and cut off the electrical connection until the humidifier can not turn on again.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?