What are the best tips to create a screen for a handyman?
The DO-IT-HYOUSELF (DIY) screen can be done in one afternoon with some cheap needs, common household tools and several useful advice. Both portable and stationary models of projection screens for handymen are available. The size varies, but the most common are 4: 3 or 16: 9, which adapt most modern dimensions of the image. The 4: 3 frame can measure 96 x 72 inches (2.4 meters x 1.8 meters), while the 16: 9 frame can be 92 x 52 inches (2.3 meters x 1.3 meters).
Before purchasing vans, projection screen diagrams, including its dimensions, should be pulled out. Illustration allows DIY Crafters at first glance at first glance the number of necessary stocks. Centers for improving the home carry different types of wood that are suitable for creating a draw -up screen for handymen. Many of them prefer poplar boards because wood has a hard consistency while it is smooth, straight and light. Others prefer wood obtained from Douglas fir.
Many people are rohIt was for 1 inch x 4desky (2.54 cm x 10.16 cm) for the outside of the frame. DIYERS can buy full length boards or have the center to trim the lumber. Crafters must then decide whether to spread the corners. If a piece of wood is added to the center of the screen, as a strengthening device, include it in the diagram. The central orthosis can prove to be seen through the screen material depending on the desired substance used.
Some people decide to add a central brace, but paint it white and minimize its appearance. The stabilization of the corners of the frame usually means using the L -shaped holders on the outer and inner corners of the frame. The designation and preliminary collection of holes before installing screws often reduce the risk of cracking or distribution of wood.
For the screen itself, some prefer curtain pads that are commonly sold in textiles stores. The substance used should be durrAble, strong and opaque, blocking light. Manufacturers generally produce a 54 -inch (1.37 meters) substance. Usually, a length of 2.5 to 3 yards (1.37 to 4.5 meters) is purchased. To cover the front of the frame and wrap around the back of the fastening, enough fabric must be obtained.
The alternative for the DIY projection material is the role of the photographer's trouble -free paper. Sold in camera stores, professionals often use this material as a background when photographing. Photos stores generally sell roles at 53 inches (1.34 meters). After a complete frame, the screen material can be stitched in place.
fabric or paper should be laid on the floor and the frame was placed on the wrong side up, on the top of the material. The material is wrapped around one side of the frame on the back. The screen is based on the site starting with the center of the board and working at the end. Repeat the same process on all sides and ensure that the material is tight and has no wrinkles. Some majiteThe projectors add several low -profile handles to the back of the frame, making it a portable screen for DIY.
The furniture bumper can be added to the bottom of the DIY screen frame. This keeps the screen level and prevents the structure from scratching the wall. Hooks, nails or screws installed in the walls of the walls hold the screen in place.