What are the differences between the plug and the socket?
The exact difference between the plug and the socket varies depending on the specific industry and the country of origin. In general, the plugs have tips that fit into the slots in the drawer. Pins, spikes or other protrusions on the plug are called male ends. Slots, holes and other containers on the drawer are called female ends. Usually the sockets are repaired on site, for example in a wall or other permanent accessories. Alternatively, the plug is movable, connected to the appliance, electronic device or other portable mechanism.
In computer electronics, the difference between the plug and the socket may be slightly different from the electrical sockets or containers. For example, the monitoring plug consists of numerous pins that fit into a socket or port on the back of a computer processing unit (CPU.) As well as Cat5 cables used to connect computers with routers and modems, have a plastic plug composed of several wires located inside the plastic clips. Cat5 connectors fit into the recessNo drawers at the back of Routerunbo Modem and capture a plastic clip in place.
In addition to the differences of location and the general physical appearance, specific applications can lead to a number of differences between the plug and the socket. Some applications in an effort to protect people and equipment from electrical risks require specific physical differences. For example, grounding may require a plug to have three or more tips in a specified pattern. Only slot sockets or holes located in the same mirror pattern can accept such plugs.
various configurations of sockets and sockets and their appropriate performances and differences differ from ground to ground. They may vary in nomenclature, physical properties and required properties. Terms such as plug and socket or power cord and outlet have different meanings and properties depending on US or European standards. Regardless of the ipoching of the differences between the plugAnd the socket requires understanding that each component is with a second symbiotic. It is connected to the sockets for connecting two parts, usually to complete the electrical circuit or create a network of interconnected devices. Each component is created to accept the connection with its corresponding counterpart.
With regard to this concept, the plug and socket can be considered two removable parts of the whole. The drawer can be considered a negative image of its corresponding plugs, with niches in the drawer to suit the protrusions in the plug. As each component compares or illustrates differences, it depends on whether they are components for electrical equipment, computer equipment, production equipment or other application.