What is 6 Coupler?

Coupler Cat 6 is a connection device used to connect two Cat 6 cable lengths. Cat 6 or category 6, the cable is a highly faithful, twisted couple cable that is used in installations. The cable consists of four twisted pairs of solid or stuck wires and is generally not protected and almost always ended with modular RJ45 plugs. To customize the joints in these cables, the CAT 6 coupling has two two sockets RJ45 back connected according to the predominant standards of the wiring scheme and closed in a metal or plastic case. For the use of the coupling, one end of each Cat 6 cable is simply connected to the sockets on both sides of the binding drive, ensuring continuity between the two cables. The cable consists of four pairs of twisted cores and is designed to significantly reduce cross -language and interference. These features allow the use of CAT 6 cables in installation power up to 250 megahertz (MHz) such as Rych Ethernet, Gigabit Ethernet and 10 gigabit ethernet systems. TOAbel is generally unshamedled and ended with modular plugs RJ45. If these cables require connections, especially patch cables running from wall sockets to individual computers, CAT 6 clutch is usually used.

These couplings are relatively simple, in-line devices consisting of two RJ45 sockets contained in the case of a plastic or light meter. The sockets are located in the Back-to-Back configuration and are connected to the appropriate standard scheme standard using wire jumpers or circuits (PCB) boards. The complete clutch is therefore relatively elegant and is able to fit into the existing cable strain or pass through the cable ports in tables or cabin walls. Some variants of Cat 6 may also include passive components designed to further suppress System Noise.

The use of Cat 6 binding coupling is fast and simple. The plugs at the ends of both cables affected areDNODUše inserted into the drawers on both sides of the clutch. The connected drawers then ensure the continuity of the cable. Some CAT 6 Cupler models are also Keystone compatible with standard plastic clips cards on the sides of the case. Keystone System is a family of patches of wagon products consisting of wall -mounted plates equipped with standardized square cut -outs. The corresponding sockets of different patterns, including the CAT 6 bonds, are then simply attached to the wall plate in readiness to connect to the network cables.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?