What is the range of miles dot?

MIL DOT Rifle range is a type of optical device used to estimate the distance. The range is a telescopic lens and has a dot formula visible by focus. These dots are used as the basis for calculating the range on the target of known size. The army uses a system for artillery, mortar and sniper rifles. The MIL DOT system is also found on commercial rifle ravages. The center of each dot, or a box or line, depending on the range manufacturer, is 1 million from the next Wednesday Dot. The length of Milliradian comes from the angle of measurement of the circle, which is a comprehensive calculation, but fits into a simple formula to estimate the distance. There are 6,283 Milliradians in the circle, but this measure was rounded by the US Army to 6,400 Milliradians and the previous Soviet Union rounded down to 6, 000 Milliradians.

The basis of a miles dot system is that dots or lines on the range can be used to estimate how far the object Zn isomé sizes from the range. For example, a sniper can identify men in the distance, because it is about 6 feet (1.8 meters) and use its height along with the interpretation of the dots on the range to see how far it is. There are a number of methods that hunters or snipers can use to calculate the range using the MIL DOT rifle range. Cross crosses of the range or dots are sorted to the target. The rifle must be held stable for the exact range.

The most commonly used method is the center of the cross range to the target. The crossing of the cross at the base base allows easy calculations, as the dots can be read along the vertical line. Then the dots count to the shooter knows how many Milliradians are high. It is essential that the shooter knows in advance how high the target is in imperial or metric measurements. For example, the hunter will generally know how tall the rabbit or deer is.

Once the target is measured in Milliradian, the range can be calculated using a simple formula. This formula is: target size in yards (or meters) multiplied by 1000 and divided by Milliradians = yards (or meters) to the target. For example, a deer, which is 1 yard (0.9 meters) and 1 Milliradian measures on the range, is 1,000 yards (914.4 meters) far away. If the same deer measures 2 Milliradians in the range, then 500 yards (457 meters) are far away.

Instead of using the formula, hunters can also refer to a pre -printed range of ranges or use a specialized calculator to speed up the process. The MIL DOT rifle range can also be used for other applications. For example, shooters can accurately predict the position of a moving goal when the speed and direction are known or use the decks to adjust your target after incorrect placement of the shot.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?