What Is a Waterproof TV?

Waterproof TV, as its name implies, adds water resistance to the original LCD TV. Widely used in humid, foggy, and watery environments. For example: bathrooms, kitchens, luxury hotel washstands, luxury villa apartment washstands, saunas, washrooms, swimming pools, outdoor advertising spaces and other places with heavy fog and humidity

Waterproof TV

Waterproof TV, as its name implies, adds water resistance to the original LCD TV. Widely used in humid, foggy, and watery environments. For example: bathrooms, kitchens, luxury hotel washstands, luxury villa apartment washstands, saunas, washrooms, swimming pools, outdoor advertising spaces and other places with heavy fog and humidity
Chinese name
Waterproof TV
Industry
electronic product
Special color
waterproof
Keywords
Innovation
Be applicable
Fog and humid occasions.
The first step is to determine the location of the TV installation, and to reserve / dig a suitable hole in the wall for embedding the waterproof TV.
Specifications and precautions:
1. This step must be completed before wall treatment (such as tiling),
2. The embedded hole is reserved and must be parallel to the vertical of the overall space to avoid the TV from tilting after installation.
3. The edge of the embedded hole should be straight, without burrs and nicks. The inner wall must be flat. To ensure that the embedded parts of the back shell can be easily clicked.
The second step is to bury the power line and the required data line into the embedded hole.
Specifications and precautions:
1. The power cord is plugged at the bottom of the insertion hole to install a standard three-way socket.
2. Other data cables can be installed according to choice, with a length of 30mm (calculated with the hole center extending vertically outward)
3. The end of the data cable needs to be connected to a standard plug, which is connected to the TV port in total.
4. Power lines and other data lines should be separated or shielded.
In the third step, the embedded part of the rear shell is placed in the embedding hole, and the eight screws around it are fixed.
Specifications and precautions:
1. Put the embedded part of the back shell into the hole first, and after determining the position, mark the wall according to the screw holes on the shell. Then take out the embedded part of the back shell, punch holes in the wall according to the mark just now, and put an expansion rubber plug. Finally, insert the embedded parts of the back shell and tighten the screws.
2. When placing and fixing the embedded parts of the rear case, pay attention to the front and back. For the front and back, please refer to the hanging port on the case.
The fourth step is to connect the data cable and power cable, and then push the TV into the embedded part of the rear case to complete the installation.
Specifications and precautions:
When connecting the data cable and power cable, pay attention to the interface correspondence. To work properly. When pushing into the TV, organize the data cable smoothly to avoid squeezing and bending.
Waterproof TV installation

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?