What is a balanced sound?

delivered by configuring dual wires balanced sound eliminates interference, because each conductor has the opposite charge to cancel noise. Both wires must have the appropriate power and voltage level and have two signal wires. They are not protected on the outside. Wires in sound systems are distinguished according to their color and usually will be red and black, but the color scheme may vary according to the device or manufacturer. The format of the twisted couple, which is commonly used for these wires, ensures the smallest amount of magnetic interference in the sound signal.

There are two wires inside the balanced sound cable cover. The difference in positive and negative polarity, while noise affects both wires, causes noise abolition. This is the rejection of noise of the normal regime, it is one quality that a sound specialist usually looks for a device. Coaxial cables are rarely used in sound systems because they create a high level of noise by concentrating on the electric conductor.

cables that carry a balanced sound have a specialized "XLR" connector, a round connection device using pins that connect to ports in sound blends and lighting devices. Another type is the tip of the tip, ring and sleeves (TRS), which is a cylindrical connector used in stereo and telephone systems. There is no shield for a balanced sound to block the wire inference; Where the cable and audio device are connected. The cable design is designed for sound without interference and is located in retail stores that sell sound equipment.

unbalanced wires and devices are usually not part of sound systems because the sound is not clear. Sometimes consumer electronics mix a balanced sound with unbalanced systems, but are not as effective as the balanced devices themselves. Balun or devices that can connect both systems can be used to become compatible with each other.

inThe use of balanced audio cables is that they can carry signals far without any degradation due to noise. Center promoting wires can cause not only noise -resistant wires but also more flexible. The shield also does not have to cover the entire wire, which will not be so bulky and more easily moved. The shields are mainly used for internal wires and the ends of the wire connectors, but many wires for a balanced sound do not include a shield.