What Should I Consider When Buying a Universal Remote Control?
Mutual-Duplicating Remote Control
Copy type remote control
- Mutual-Duplicating Remote Control
- Wireless industrial control products
- 1. Industrial vehicles: Industrial vehicles are one of the most widely used fields of remote control systems. Taking Germany as an example, they account for about 40% of the annual output of remote control systems; especially new vehicles such as metallurgy, automobile manufacturing, paper mills, and material warehouses. Almost all equipped
- Copy type remote controller Shanrong Electronics SR715
- Copy type remote controller Shanrong Electronics SR715
- First, we must hold down the two BC buttons above the remote control at the same time. At this time, the LED flashes and then goes off for about 2 seconds. The LED flashes quickly, which indicates that the original address code has been cleared. At this time, short press all the buttons. The LED flashes. Lights up and goes out.
- The second step is to copy the address code of other remote control
- Place the original remote control and learning remote as close as possible, and simultaneously hold down the button that needs to be copied and one button of the learning remote. This latest flash learning technology generally takes only 1 second to flash quickly, which indicates that the button The address code has been successfully learned! The other three buttons on the remote control are also operated in the same way.
- We can even combine two remote controllers (same frequency) with different address codes into one self-learning remote controller. It should be noted that sometimes the mutual position of the original remote control and the learning remote control during learning is important. Some may have better head-to-head effects, and some may have better back-to-back effects. Customers can try to learn a few times and see which one to learn. The farthest remote control is better.
- Recovery operation after misoperation:
- If you accidentally clear the address code of the self-learning remote control, you can also press the two DA buttons under the remote control at the same time for about 2 seconds, the LED will flash 3 times, and then it will start to flash quickly. The accidentally cleared address code has been successfully restored.