What Does a Furniture Assembler Do?

Woodworking assembly machine is a kind of woodworking machinery that assembles the frame and the whole assembly during the processing of furniture, crafts, and solid wood doors. Due to the different assembly methods, many different types of models are derived, replacing manual assembly to improve production effectiveness.

Woodworking assembly machine

Woodworking assembly machine (woodworking lathe)

Woodworking assembly machine structure

The whole machine consists of a frame, a screw, a table, a speed changer, a motor, and an electronic control system.

Woodworking assembly machine (3 photos)

Working principle of woodworking assembly machine

Two positive and negative lead screws are matched with four nuts, installed horizontally on the frame, the longitudinal pressure beam is processed into an L-shape, and fixed on the nut in parallel; the clamping torque is output by the motor and transmitted to the worm gear transmission via a belt to increase the torque The torque is transmitted to the screw rod through the sprocket chain, which drives the screw rod to rotate synchronously. Pressing the button to control the forward and reverse rotation of the motor can control the clamping and synchronous loosening of the pressing beam to achieve the purpose of clamping and assembly.

Operation of woodworking assembly machine

1. Depending on the size of the frame workpiece, press the release button to open the pressure beam. When the workpiece can be placed, release the button immediately. 2. Insert the workpiece, press the clamping button to tighten the clamping beam to clamp the workpiece, and release the clamping button.

3. Press the release button to open the pressure beam to remove the workpiece, and one workpiece is assembled; repeat the above operations to complete the batch assembly.

Woodworking assembly machine mechanical failure and troubleshooting

1.The machine cannot run normally

a. Power phase loss --- check and repair the power line.

b. Circuit breaker tripping --- Check the cause of the trip and press the switch after finding that it is correct.

d. Machine circuit damage --- check and repair the mechanical circuit.

2. Uneven pressing force at both ends of the pressure beam

a. Screw and nut wear --- Replace the screw and nut.

b. Pressure beam fixing screws are loose --- Fix the pressure beam screws.

Precautions for woodworking assembly machine operation

1.Handle your hands carefully during operation

2. The machine without protective cover on the sprocket chain cannot be used.

3. After pressing the workpiece, do not continue to press the clamping button, otherwise the motor will be easily damaged.