What Does a Garment Manufacturer Do?

The garment factory is equipped with a full set of more than 120 sets of modern garment (woven) manufacturing equipment, including high-speed lockstitch sewing machines, three to five-thread overlock sewing machines, cutting tables, large dehumidification ironing tables, and special machines with round head buttonholes. Machine, flat head buttonhole machine, high-speed electronic bar tacking machine, button sewing machine, edge picking machine, double needle lockstitch sewing machine, computer automatic sleeve-sleeving machine, barrel type three-needle stitch sewing machine, double-thread chain sewing machine. The construction of a garment factory fully considers the combination of production and education, gives full play to the advantages of talents and equipment technology, provides technical support for enterprises, and solves technical problems in the production process of textile and apparel enterprises. At the same time, with the development of large-scale clothing enterprises in a bundled manner to adapt, influence, and guide the construction and development of the regional economy.

Garment factory

Chinese name: Garment factory
Basic requirements 1: Design power

Basic requirement 2: Production force
Basic requirement 3: Sales force

Basic requirements for clothing companies:

1. Read the order information. After receiving the order information, carefully check whether the information is complete and accurate. The order information is the sole basis for the follower to follow up the order. Only complete information can ensure the follow-up work of the order. Check the specific content of the analysis data: a) whether the information is complete b) whether the text description is in line with the style picture 1 c) confirm the surface and accessories d) check the other design elements such as embroidery printing e) understand the customer's special requirements 2. make the order, check, Consignment. Study the order information with the order, make a to-do list, list the necessary surface materials and prepare them, and hand them to the board room to make paper patterns and do the work. Post-rectification and inspection, the technical department will send it to the customer for approval after checking OK. At the same time, according to the materials used for the house report, the materials cost table was sorted out in duplicate, one for the order followers and one for the bottom for costing and ordering materials preparation. a) Initial operation: The purpose is to let the customer confirm whether the style and shape of the clothing are accurate, whether the design style is consistent, whether the sewing process meets the requirements, etc. Production offices can use alternative fabrics. The number of production offices depends on the needs of customers. b) Large cargo office: It is the last sample confirmed by the customer before the production of the order. Therefore, the large cargo office has higher requirements for production. It needs to use the surface and accessories in the order, and the specifications are required to be full color and full code. The large cargo office cannot enter the production of large cargo until it is confirmed by the customer. c) Sample inspection details: Mainly inspect the material and color of the surface accessories of the sample clothing, and check the style. Inspection of dimensions and packaging. The range of specifications for each part of the finished garment must meet the customer's requirements.

After the approval of the version is OK, the next production of large goods, first schedule with the production department. After the standard samples are returned to the factory, according to the customer's comments, requirements and samples, a large goods production order is produced and submitted to the technical department for review. Convened pre-production meeting of factory management, QC and customer QC. Check whether the production process sheet of the factory is consistent with the customer's standard. The key points of the check include: whether the material and color of the surface and accessories are correct; whether the style is correct. Attention: During the production process, submit the data to QC, and QC will follow up the production quality monitoring and follow up. Progress in production, timely coordination and communication between customer requirements and workshop production. In the event of customer changes, information must be communicated to relevant departments as soon as possible, and the latest version of the information must be maintained and a record of receipts made. It is found that the failure to meet the requirements of the production plan is reflected to the superior department to supervise the solution and understand the actual situation of the department in order to complete the scheduled tasks and ensure the delivery time and quality. Large goods need to be postponed due to objective problems. Write down the reason for the court period and the delivery period after the court period, discuss with the customer, and ask for a reply as soon as possible. The guest needs to send out an email / written sign-in. When washing the finished product, the workshop must make several pieces of washing water as soon as possible to understand the size and washing effect, and at the same time approve the guest to check whether the color of the washing water is OK, and confirm the acceptance before washing the large goods. When the finished product is found to have too many defective products after the general inspection, each item needs to be inspected. If there are minor defective products, the goods can be taken away. Which department has the serious responsibility to track down the parties in the department and notify the production manager.

Packing Office: Before packing large goods, check the first packing office of the package to ensure that the materials are complete and the packaging method is correct before packing. If the customer requires approval and then bulk packing, you need to pack in advance. Samples are given to customers for approval. Actively prepare and cooperate with customers for initial, intermediate and final inspections, and feedback customer inspection information to various departments. After the production of finished products, pick the bow office or receiving office to the customer according to the customer's requirements. The purpose is to let the customer know the production status of the large cargo and the quality of the order in advance. The quantity of the sample is determined according to the customer's requirements. And one week before the goods are delivered, the commodity inspection information must be submitted to the customs officer for commodity inspection. What information is needed for the commodity inspection, please provide it after asking the customs officer. After the customer passes the inspection, verify the number of shipments and organize

The factory management of the modern clothing factory has special regulations for the smooth operation of the factory and the normal operation of the factory:

1. The director of the workshop shall urge relevant personnel to inspect every corner of the workshop before work every day to do a good job of safety inspection.

2. After work, urge all relevant personnel to close the doors and windows. Before the door is locked, be sure to check whether the doors and windows are closed properly, clean up all personnel in the workshop, and close all circuits in the workshop.

3. Do safety work such as fire prevention and anti-theft to ensure safety first.

4. Do a good job of propaganda work on fire safety and other aspects.

5. It is strictly forbidden for all flammable materials and fires to enter the production workshop, and smoking is prohibited in the workshop.

6. Supervise each employee to adopt the habit of leaving the institution and remind relevant personnel to conduct regular security inspections.

Garment factory production preparation

Incoming inspection of noodles and auxiliary materials Technical preparation Pattern making Testing samples Seal samples Developing process documents Cutting Sewing Confirming the first piece (washing first tank) Inbound shipment.

Inspection of fabric accessories in garment factories

According to the details of the short code / less phenomenon according to the delivery order, you must personally participate in the inventory and confirm the large goods. Follow the order. Determine the delivery date of the large goods. After the fabrics enter the factory, you must perform the quantity inventory, and the appearance and internal quality inspection. The required talents can be put into production. Prior to mass production, technical preparations must be made, including the formulation of process sheets, prototypes, and sample garments. The sample garments can be entered into the next production process after being confirmed by the customer. The fabric is cut and sewn into semi-finished products. After some woven fabrics are made into semi-finished products, post-processing is required according to special technological requirements, such as garment washing, sand washing, wrinkle effect processing, etc., and finally buttonhole button fastening. The auxiliary process and the ironing process are packed and stored after passing the inspection.

Check the opposite / accessories according to the unit consumption confirmed by the customer, and report the specific data to the company in written form. If there is any lack of materials, timely implement the replenishment and inform the customer. If there is a surplus, report the customer to the warehouse for storage after the end of the large cargo, and use it sparingly to prevent waste.

Since the quality of the grey fabric is directly related to the quality and output of the finished product, before cutting, you must check whether the number of pieces, size, density, batch number, and linear density meet the requirements according to the cloth ingredients list for the cut. Inspections are conducted to mark all types of defects that affect the quality of the finished product, such as flowers, missing stitches, holes, oil stains, etc. Marking and quality records are important. Controlling fabric quality is an important part of controlling the quality of the finished product. The inspection and determination of incoming fabrics can effectively improve the authenticity rate of clothing. Fabric inspection includes two aspects: appearance quality and intrinsic quality. In appearance, the main inspection is whether the fabric is damaged, smudged, weaving defects, color difference and so on. Sand-washed fabrics should also pay attention to whether there are sand-washing defects such as sand channels, dead creases, and cracks. Defects that affect appearance need to be marked with marks during inspection, and avoid use when cutting. The inherent quality of the fabric mainly includes three items: shrinkage, color fastness, and gram weight (m meters, ounces). When carrying out inspection and sampling, representative samples from different manufacturers, different varieties, and different colors should be cut and tested to ensure the accuracy of the data. At the same time, the auxiliary materials entering the factory must be inspected, such as shrinkage of elastic bands, the fastness of the adhesive lining, the smoothness of the zipper, etc. The auxiliary materials that cannot meet the requirements are not put into use.

Garment factory technical preparation

After receiving the samples and original materials, according to the process requirements (refer to the customer's original), make reasonable cardboard, and make a record of various technical processes, and be responsible for technical problems encountered in the production process.

According to the sample time stipulated by the customer and the factory, arrange the production of the sample clothing, and do a good job. When the sample is not clear when the sample is made, you must actively propose to the order or to the factory manager. They go to discuss with customers and cannot make their own claims.

Carefully review the information of the customer's process sheet, the original sample, clearly understand the customer's requirements, size, raw materials and ingredients, etc. When doing the sample sample approval for the customer, the principle is to facilitate the production in the workshop, suggesting a simplified car Sewing process. After the sample clothing is completed, compare the original sample with the technical list, and confirm that it is correct before sending it.

Adjust the board according to the size list and shrinkage rate of the fabric according to the motherboard. Introduce boards of other sizes, and do a good job of reviewing the model. The text, silk, embroidery, model number, anyway, etc. on the model are indicated.

If the factory has not sampled in the early stage, it must arrange for the quick confirmation of the sample before production and notify the factory responsible person and the factory technical department of the test results in writing. Under special circumstances, it must be submitted to the company or the customer for confirmation. After proofreading the factory cut the sample, you can confirm the version length. The detailed unit consumption confirmation is signed and confirmed by the person in charge of the factory. Before mass production, the technical staff must first make the technical preparations for mass production. Technical preparation includes three parts: crafting list, making of model and making of sample clothing. Technical preparation is an important means to ensure that batch production runs smoothly and that the final product meets customer requirements. Craft sheet is a guiding document in garment processing. It puts forward detailed requirements for garment specifications, sewing, ironing, packaging, etc. It also clarifies details such as the matching of clothing accessories and the density of seams. Each procedure in garment processing should be carried out in strict accordance with the requirements of the process sheet. 1. Organize the data of large-scale production (pre-determined samples, sample modification comments, fabric color cards, various auxiliary materials cards, size tables); 2. Sewing requirements, sewing processes, and process graphics. 3 Fabrics, auxiliary materials, plastic bags, cartons required for large-scale production; ironing method, confirming packaging method, and packing distribution.

Prototype production requires accurate dimensions and complete specifications. The contour lines of the relevant parts exactly match. The model should be marked with the clothing model number, location, specifications, silk direction and quality requirements, and the template compound seal should be stamped at the relevant splicing place.

Make the pre-production version: use the large-scale surface auxiliary materials (if there is no material, you can temporarily substitute, but it needs to be clearly marked) to make the correct pre-natal sample, follow up and approve (including the process, size, auxiliary materials, style, etc., in short, the large-scale sample. ).

After the completion of the process sheet and template development, small batches of sample clothing can be produced, and the discrepancies should be corrected in time according to customer and process requirements, and the difficult points of the process should be tackled so that large-scale flow operations can be carried out smoothly. After the sample is confirmed and signed by the customer, it becomes one of the important inspection basis. Can timely find out some problems that may occur in production and ask customers whether to modify. Pay attention when writing the process: 1: whether the material is correct. 2: Is the size "accurate". 3: Whether the style is wrong. 4: Whether the workmanship is meticulous. 5: Whether the color of the finished product is "correct". 6: Whether there is missing material. 7: Whether the material can arrive at the processing plant at the scheduled time. 8: Is there any problem in time.

Before production, test the working hours of each process, make a process sheet, and ask the director of the workshop to confirm and modify it.

In the initial stage of production, semi-finished products must be inspected to a high standard in each workshop and each process. If there is a problem, the responsible person in charge of the factory and the corresponding management staff must be timely reflected, and the factory must be supervised and assisted in implementing the rectification.

After the first finished product is removed from each workshop, its size, workmanship, style, and craftsmanship must be thoroughly and thoroughly inspected. When there are 20-30 pieces in the middle period to see if there is water washing, choose 20 pieces of shampoo tank. After washing, an inspection report (in the early / mid-term / end of large-scale production) and rectification opinions will be issued. After being signed and confirmed by the person in charge of the processing plant, one copy will be kept in the factory, one copy will be retained and the company will be faxed.

Record and summarize your work every day and work out a work plan for tomorrow. The production schedule is listed in advance according to the delivery date of the large goods, and the factory cutting progress, production progress, finished products, and number of production machines are recorded in detail daily, and the progress is implemented according to the production schedule and the factory is urged.

Production progress should be reported to the company at any time. For the production and quality requirements raised by the customer follower or the company to the factory, the processing factory should be supervised and assisted in implementation, and the company's implementation status should be reported in time. The finished product enters the finishing shop, and the quality of the ironing and packaging of the actual operating workers need to be checked at any time. The packaged finished product is randomly inspected from time to time to detect and deal with problems early. Do your best to ensure the quality and delivery of large goods.

After the large goods are packed, check the cutting details with the packing list, and check whether each color and number match. If there is a problem, the cause must be identified and resolved accordingly.

Summarize the coordination and cooperation of various links in the production process, the problems that arise, the ability to respond to problems and the entire order operation situation, and report to the company's supervisor in written form.

After the processing is finished, all remaining fabrics and accessories are cleaned up and recovered in detail. And returned to the warehouse.

Clothing factory cutting and cutting process

Requires cloth inspection material arrangement sample material use cutting writing number bundling.

Marking is generally used, unidirectional, bidirectional, arbitrary, etc. Cutting is generally carried out by cutting. Commonly used are flat, mutual, inlay, splicing, slitting and so on.

Before cutting, you must draw a marker according to the template. "Complete, reasonable and economical" is the basic principle of marker. The main process requirements in the cutting process are as follows:

(1) Look at the correct sample, check the number of pieces corresponding to the template, and see if any errors such as lost, slick, and silkworms appear. Make corrections to the technical staff in time. We are arranging according to the quantity of large goods and arrange large goods. After sorting, calculate the unit consumption according to the total number of large goods. Plus the loss report to confirm with the orderer. When arranging the samples, the unit consumption of various fabrics should also be discharged according to the customer supply fabrics and reported.

(2) After the arrival of each batch of large-scale fabrics, one hundred garments (drawing in batches) will be made according to the condition of the fabrics, and the shrinkage rate (50 * 50 squares). Shrinkage rates include natural shrinkage and washing shrinkage. Natural shrinkage, natural shrinkage refers to the natural shrinkage of fabrics after ironing or relaxation of fabrics in large-scale production; the correct shrinkage method of testing fabrics should be the same as the type of washing water for large-scale garments. If the garments are not washed, the fabrics Just measure with a steam iron. Wash shrink, wash shrink refers to the quality of the shrinkable fabric after the garment is washed, including cloth seal, color, feel (texture); color difference, edge difference, step difference, door width mismatch, shrinkage rate is too large, you can ask to return .

(3) For different batches of dyed or sand-washed fabrics, cut them in batches to prevent color difference on the same garment. For the color difference phenomenon in a piece of fabric, color difference and positioning are required. When discharging, pay attention to the straightness of the fabrics and the direction of the threads of the garments to meet the process requirements. For fleece fabrics (such as velvet, velvet, corduroy, etc.), do not discharge the materials in an orderly manner. One direction, otherwise there will be pilling, backlighting and so on. Otherwise it will affect the shade of clothing color. (4) Confirm the fabric anyway when dragging. The mop is flat and moderately tight. The number of models must be checked. Pay attention to avoiding defects. The width of the mop is divided into cylinders and mops. For the striped fabric, pay attention to the alignment and positioning of the stripes in each layer when dragging to ensure the consistency and symmetry of the stripes on the garment. Pay special attention to knitting, fleece, pleated fabrics and other stretchable fabrics. Put them in advance, and naturally shrink for 24 hours before cutting to avoid cutting too small. (5) Cutting is required to be accurate, and the lines are straight and smooth. The pattern should not be too thick, and the upper and lower layers of the fabric are not biased. The error between the cut piece and the template of the same specification cannot exceed 0.2cm, and the depth of the tooth shear does not exceed 0.6cm. Don't have different pieces of the same size. (6) Write the number according to the template alignment. The card number should be 0.6cm (including the number) from the side. The number should be clear. Change the number clearly and write the number for each piece. (7) When using tapered holes, care should be taken not to affect the appearance of the garment. After cutting, you need to count and inspect the photos, and bundle them according to the specifications of the clothing. Attach a ticket to indicate the model number, location, and specifications.

(8) For each order cut, leave the cloth head and cloth tail for future use, so that it is necessary to arrange the pieces in the workshop.

(9) Make mop records and check unit consumption.

Garment factory sewing

1. Seam

Because the fabric of the fabric has the characteristics of extensibility (ie elasticity) in the longitudinal and transverse directions and the shortcomings of the edge coils, the stitches of the knitted fashion should meet the following requirements: (1) The stitches should be compatible with the knitted fabric Stretchability and strength. (2) The stitching should prevent the fabric loops from falling apart. (3) Appropriately control the density of seams. For example, the stitch density of the lockstitch on thick fabrics is controlled at 9 to 10 stitches / 2cm, the stitch density of overlock stitchers is 6 to 7 stitches / 2cm, and the stitch density of thin stitches is controlled to 10 to 11 stitches / 2cm, stitch density of overlock sewing machine is 7-8 stitches / 2cm. Determined according to customer requirements. 2. Stitches and sutures must meet the following quality requirements: (1) Combed cotton threads (sewing threads) for sewing machines should use combed cotton threads, which have high strength and uniformity. (2) The suture should have a certain elasticity, which can prevent the thread from breaking due to the twisting or squeezing of the thread during sewing. (3) The suture must be flexible. (4) The suture must be even and smooth to reduce the resistance or friction of the suture in the grooves and pinholes, and to avoid defects such as broken threads and uneven stitch tension. Determine the line number and color according to customer requirements. 3 Sewing machine needles are also called sewing needles and machine needles. In order to achieve the ideal cooperation of the sewing needle with the sewing material and the suture, a suitable sewing needle must be selected. Sewing is the central process of garment processing. Sewing of garments can be divided into machine sewing and manual sewing according to style and craft style. Flowing operation is performed during the sewing process. The application of adhesive lining in clothing processing is more common. Generally, there are woven lining and non-woven lining. Its role is to simplify the sewing process, uniform the quality of clothing, prevent deformation and wrinkling, and play a certain role in clothing modeling. Most of its types are non-woven fabrics, woven fabrics, and knitted fabrics. The use of adhesive linings should be selected according to clothing fabrics and parts, and the time, temperature and pressure of gluing must be accurately grasped to achieve better results. .

Adhesive worker technical operating procedures:

1 Strictly lining the clothing pieces according to the process requirements. Do not stick to the wrong lining. It is strictly forbidden to stick less or more.

2 It is necessary to adjust the temperature and pressure of the sticking machine strictly in accordance with the process requirements, and no stickiness, uneven bonding, and inadequate bonding should occur.

3 When sticking the lining, pay attention to the front and back of the fabric and the lining. It is strictly prohibited to stick the lining to the front of the fabric or if there is a problem with the bonding machine, report it in time

In garment processing, the stitches are arranged in series with each other to form a firm and beautiful stitch on the garment piece according to a certain rule. The stitches can be basically classified into the following four types: 1. Chain stitches are made up of one or two suture strings. A single suture is called a single thread chain seam. The advantage is that the amount of thread used per unit length is small, and the disadvantage is that when the chain line breaks, the side locks disengage. The double stitches are called double stitches, which are formed by stringing a needle thread and a hook thread to each other. Their elasticity and strength are better than lock stitches, and they are not easy to fall apart. Single-line chain stitching is often used for hem of blouses, quilting of trousers, and tying of suit jackets. Double thread chain stitches are often used for stitching and seam-saving stitching. The back and side seams of trousers, elastic bands, etc. are subject to more tension and stress. 2. Lock stitch is also called shuttle stitching. It is cross-connected by two stitches in the stitching material. The two ends of the stitching material have the same shape. Its stretchability and elasticity are poor, but the upper and lower stitches are tight. Straight lock stitches are the most common stitches for sutures, because they use less thread and have less stretchability. They are often used for two pieces of stitching. Such as hemming, saving seams, bagging and so on. 3 Overlock stitches are stitches that are looped around the edge of the material by several stitches. It is named according to the number of stitches that make up the stitch (single-thread overlock, double-thread overlock ... six-overlock overlock). Its characteristic is that the edges of the sewing material can be covered, which can prevent the edges of the fabric from falling apart. When the seam is stretched, the upper and lower threads can be transferred to each other to a certain degree, so the elasticity of the seam is better, so it is widely used for hemming of woven fabrics. Three-thread overlock and four-thread overlock are the most commonly used edges of woven garments. Five-thread overlock and six-thread overlock are also called "composite stitches", which are composed of a double-thread overlock and a three-thread overlock or a four-thread overlock. Its biggest feature is its high strength, which can be used for seaming and overlocking at the same time, thereby improving the density of the seam and the production efficiency of sewing. The sewing of the garment as a whole requires regular and beautiful appearance, and no asymmetry, distortion, missing seams, or wrong seams can occur. Striped fabrics should pay attention to the continuity of the pattern at the stitching during sewing. The strips are symmetrical to the left and right. The stitches must be uniform and straight. The arcs must be smooth and smooth. The garments must be flat and free of wrinkles and small folds. Good, no breaks, floating lines, draw lines, etc .; important parts such as collar tips must not be wired.

Buttonhole button in clothing factory

Buttonholes and studs in clothing are usually machined. Buttonholes are divided into flat and eye-shaped holes according to their shape, commonly known as sleeping holes and pigeon eye holes. 1.Sleep hole

It is widely used in products such as shirts, skirts, pants, etc.

Pigeon eyelet

Mostly used for outerwear of thick fabrics such as tops and suits. The keyhole should pay attention to the following points:

(1) Whether the buttonhole position is correct.

(2) Whether the buttonhole size matches the button size and thickness.

(3) Whether the buttonhole opening is cut properly.

(4) For stretchy (elastic) or very thin clothing, consider using keyholes to reinforce the fabric when using keyholes. The sewing of the button should correspond to the position of the buttonhole, otherwise the clothing will be distorted and skewed due to the inaccurate button position.

When buttoning, you should also pay attention to whether the amount and strength of the button line are sufficient to prevent the button from falling off, and do not appear the phenomenon of flowering, crooked, turning, or hole breaking. Whether the number of stitches for stitching thick fabric clothing is sufficient.

Garment factory ironing

Ironing People often use "three-point sewing and seven-point ironing" to strongly adjust the ironing is an important process in garment processing. Be sure to confirm the ironing method and strictly follow the customer's requirements. Make sure the ironing table is clean and hygienic. When folding and ironing, strictly follow the process requirements to ensure uniformity. To ensure that clothing products are not contaminated, we must strictly implement the "three without one" rule, that is, no water splashes, no light, no linen marks, and no hot stamping. It is necessary to regularly maintain the equipment in accordance with regulations to ensure that the appearance of the equipment is clean. In the event of failure of the equipment, the equipment maintenance personnel must be notified in time, and the machine must not be disassembled without authorization. When using a steam iron, pay attention to the use of steam. When the operator leaves the machine, pay attention to shut down at any time.

During the operation, the buttons should be neatly stacked and not littered. The ironing tools should be placed on the stand, and should not be placed directly on the chopping board with clothing pieces, so as not to burn the chopping board. When the operator leaves the ironing table, there are three main functions to remove the power plug in time: (1) Remove the wrinkles of clothing by spraying and ironing, and flatten the creases. (2) After the heat setting treatment, the appearance of the garment is flat, and the pleats and lines are straight. (3) Use "Home" and "Pull" ironing techniques to appropriately change the fiber's expansion and contraction and the density and direction of the fabric's warp and weft to shape the three-dimensional shape of the garment to meet the requirements of the body shape and active state, so that the garment reaches the shape Beautifully dressed for comfortable purposes. The four basic factors affecting fabric ironing are: temperature, humidity, pressure, and time. Among them, the ironing temperature is the main factor affecting the ironing effect. Mastering the ironing temperature of various fabrics is the key issue for finishing garments. If the ironing temperature is too low, the ironing effect will not be achieved; if the ironing temperature is too high, the clothes will be damaged and the damage will be caused. The ironing temperature of various fibers is also affected by various factors such as contact time, moving speed, ironing pressure, the presence or absence of pads, the thickness of the pads, and the presence or absence of moisture. The following phenomena should be avoided during ironing: (1) Aurora and scorching on the garment surface due to ironing temperature being too high for too long. (2) Ironing defects such as fine ripples and wrinkles are left on the surface of the garment. (3) There are missing hot spots.

Garment factory garment inspection

The finished product inspection is a comprehensive inspection before the product leaves the factory. It includes two major items: appearance quality and intrinsic quality. The appearance inspection content includes dimensional tolerances, appearance defects, and seam fastness. Inner testing items include fabric weight per unit area, color fastness, shrinkage rate, etc. The inspection of clothing should run through the whole process of cutting, sewing, buttonhole buttoning, ironing and so on. A comprehensive inspection of the finished product should also be carried out before packaging and storage to ensure the quality of the product. The main contents of the finished product inspection are: (1) Whether the style is the same as the confirmation sample. (2) Whether the size specifications meet the requirements of the process sheet and sample clothing. (3) Whether the sewing is correct and whether the sewing is regular and flat. (4) Check whether the stripe fabric is correct. (5) Whether the fabric threads are correct, whether there are any defects on the fabric, and whether there is oil stain. (6) Whether there is a problem of color difference in the same clothing. (7) Whether ironing is good. (8) Whether the adhesive lining is firm and whether there is any glue leakage. (9) Whether the thread ends have been repaired. (10) Whether the clothing accessories are complete. (11) Whether the size (washing water), trademark, etc. on the clothing are consistent with the actual contents of the goods, and whether the location is correct. (12) Whether the overall shape of the clothing is good. (13) Whether the packaging meets the requirements.

Clothing factory shipment or storage

Clothing packaging can be divided into hanging and boxing, boxing generally has inner packaging and outer packaging. The inner packaging means that one or more pieces of clothing are put into a plastic bag. The style and size of the clothing should be the same as those marked on the plastic bag. The packaging must be flat and beautiful. Some special styles of clothing need special treatment during packaging. For example, twisted clothing should be packaged in the form of twisted rolls to maintain its style. The outer packaging is generally packed in a carton, and the size and color are matched according to customer requirements or instructions of the process sheet. There are four types of packaging: mixed color mixed code, single color single code, single color mixed code, and mixed color single code. When packing, please pay attention to the complete quantity and the correct color and size. Brush the box on the outer box, indicating the customer, port of shipment, box number, quantity, origin, etc., and the content is consistent with the actual cargo.