How can I reset the network adapter?
There are several different ways to reset the network adapter, although the two most common ways include removing the adapter from the computer. This can be done by physical removal and restarting the computer and then reinstalling the card. Software can also be removed by uninstalling the controls and software to reset the network adapter and then reinstalled the adapter. If you have internet connection problems, you can also consider resetting your modem and router, as these devices can usually cause such problems. It can be wireless devices designed to allow the computer to connect to a wireless network or cable devices that allow connection to the cable network, usually via the Ethernet cable. To reset the network adapter, it usually requires a form of "removal" of the adapter from the computer and then supporting the device.
the most direct wayHow to reset the network adapter is to turn off the computer and then physically remove the device from the motherboard. This can be done not only for resetting the device, but it can also be done to test if problems may arise from a port problem where the card connects to the motherboard. When you reset the network adapter in this way, you can try to re -connect the card to another port on the motherboard and restart your computer to see if the card is working properly. This can solve some problems and are worth testing before performing software resetting.
Resetting a network adapter without physical taking a card can be easily uninstalled by all drivers and other software needed for the operation of the card. The computer can then be restarted and drivers and the software will be reinstall. This can be a good way to solve problems caused by drivers or other programs are corrupt. Depending on the card, however, it may be necessary to combine both methods and uninstall software, physicallyRemove the card and then reinstall the software and card according to the installation instructions for the adapter.
6 This is done quite easily by simply disconnecting these devices from the power source and waiting for one minute before connecting them back. You should disconnect both the modem and the router at the same time, and then connect them one by one in the same direction as if the signal was going through your network. In other words, connect the modem back to the first and once the signal is created, then connect the router; You may also need to restart your computer.