How can I set home WLAN?

Generally there are three steps to set home wireless network of local area (WLAN). First, you need to find out if you want your WLAN home to join the Internet. You will also need to select a wireless standard for your WLAN. Finally, you will need to set your WLAN and////or attach access points to all the components you want in your home network. If you do not need Internet access for WLAN, you will want ad hoc wlan-sometimes labeled as an independent basic set of services (IBSS) or Peer-to-peer network. This type of WLAN simply requires connection of two or more computers, wirelessly. On the other hand, WLAN infrastructure connects one or more Internet computers via an access point. For people who want wireless access to the Internet at home, this access point is often a router that is physically connected to the modem.

home components WLAN communicate together forStandard - Standard 802.11. There are four versions of this standard: A, B, G and N and components that operate on one standard may not be compatible with components that work on another standard. For example, since 802.11b and G have been working at 2.4 GHz and 802.11a, you will not be able to have WLAN 802.11g with components of 802.11b. Only 802.11n works on both frequencies. Determining the standard for your WLAN with respect to the components you want to refer to WLAN is an important step in the setting process.

The last step will depend on whether you are setting ad hoc home WLAN - one without access to the Internet or WLAN infrastructure - one with Internet access. For Ad Hoc Wlan, you will have to configure your wireless devices to "speak" Directly to each other without access points between - access points are reserved for WLAN infrastructure. You want to get computers to communicate, everyone will have to have their own wirelessOut adapters that are set to ad hoc mode and the same channel number. Finally, you name your network and create an ID set (SSID) to which your computers and other devices connect.

For Home Wlan infrastructure - one that connects to the Internet - first you want to find a central place for your access point. You must connect the access point (or router) to the power supply and then connect it to the modem. You will also need to configure the router, which is often the easiest to use the web interface offered by the router manufacturer. If you want to configure your router, you need to select SSID, set the channel on which your network will work, and set the security options to WPA or WEP or Mac. Every component you want to join your WLAN, Need to be individually linked through the component itself. Cable equipment, such as printers, can also be connected to WLANS.