What is the heat tape?
The heat tape is one type of adhesive that can be used between a computer chip and a guy, usually selected when the cooler does not have a retention system that remains in place. The thermal tape acts as a clutch that holds the cooler while filling the small gaps between two surfaces to transfer heat more efficiently from the chip. The problem with the thermal tape is that it is not a very efficient heat conductor. Fortunately, there are other options that perform better work.
There were times when computer processing units (CPUs) did not require coolers, but because the chips became stronger, they generated more heat. When heatsinks were first available, they were added as spare parts and had no retention systems. The heat tape provided a satisfactory solution to solve two problems: get the sink to stay in place, and fill microscopic gaps that slowed the heat transfer to the chip and cooler surface.
as technology advanced and heating theManufacturers started to pack them with CPU, while the motherboards accepted proposals to accept retention systems. Several compounds have also been developed and sold to improve heat transfer with excellent results on the thermal tape.
Some of the materials used instead of the thermal tape include fat cushions, silicon and ceramic pastes and metal pastes. Compounds containing metals are generally considered to be the best heat conductors, but if the material reaches the motherboard, it can cause short. In some cases, players might want to connect a third -party heater to a graphics card chipset, for example where the retention system is not a possibility. Instead of thermal tape, thermal fat -fat fat -based fat meat could be selected. It transmits heat better than the heat tape, even if the binding is permanent.
CPUs that are packed with heatsinkuound designed for use with the product. In manyPads are a thermal fat placed on the bottom of the radiator. All you have to do is peel off the protective paper seal before installation. The CPU warranty often depends on the use of thermal material wrapped with a chip and a guy.
If the cooler is removed from the CPU, all thermal material should be cleaned from both surfaces and a new material should be used before the re -installation. It is generally recommended to friction of alcohol for cleaning of surfaces. Check the recommendations on what type of thermal compound to be used by the CPU warranty or on the manufacturer's website. It is not recommended to use a CPU cooler without the use of a type of heat fat. The chips of the chip can quickly overheat and melt or become broken. Players and overclockers are recommended to use premium thermal materials for the best results. Unfortunately, you can be practically sure that a highly affordable thermal tape will not be one of the tdopuji.