How can I choose the most effective wooden joints?
The selection of the most effective wooden joint is generally dependent on the type of object being built by a craftsman. For example, wooden joints that could serve perfectly well in a dresser or dining table would not be suitable for a musical instrument or Knick-Knack shelf. Fortunately, there are a number of wooden joints from which the builder can choose. Their strength and appearance may vary dramatically. The most common use of painting and cap is to connect to two pieces of wood at an angle of 90 degrees. In its simplest sense, the mortar is a hole or cavity that has been drilled, carved or cut into one piece of wood. Czech is a language or projection on another piece of wood, usually higher than wide. Chenne fits into Malti and is either glued or wedged in place .ar, it is easy to fashion. The value of the dowels is formed by drilling holes into both pieces of wood to connect. Furthermore, wooden dowels covered with glue are inserted into the holes. Edges of wood meetings are covered with glue, pounded together to create a smooth adaptation,And they gripped dry. Two other variations of Mortise and Trotře are the connection joint and joint of biscuits.
Another of the strongest wooden joints, common in the drawer construction, is a dovetail. The flat end of the board designed as the side of the socket is cut into trapezes or projection. Trapezoidal holes of the same size are cut into the wood as the front of the socket. These two pieces are blocked, glued together and then gripped. The joint of the dovetail cannot be torn off and is known for its huge tension strength.
Finger joint is created on the same assumption as fish, with the exception of the location that languages and holes are more square than trapezoids. The joint of the finger, although not as strong as Rybín, is still useful. It is easy to create on a table saw or a router, while fishing requires that the woodcraft has a high degree of skill.
Other effective wooden joints include DADO, which is only SDŘebin or grooves cut to the surface of the wood. The DADO joints often occur in libraries, while the shelves slip into the corresponding groove on each side. It is also found on libraries and cabinets, especially on the back, the Rabbet joints. The Rabbet joint is a niche cut to the edge of the wood that resembles "L." The thickness of the rear piece, which will be glued and mounted in this joint, should be equal to the niche depth.