What are the different types of beam construction?

i-yoists, laminate beams and truss beams are some of the types of construction of beams that are usually available. All of them are made of lumber that are extremely strong and have the ability to bridge more than conventional woodcut beams, such as two or two or two. Each usually works best for a specific design project of beams. For example, I-Joist usually works best for the construction of beams, where the beam must bridge large distances above the cellars without the use of a contribution; The droppings usually work best for roof construction, where frame members must bridge large rooms without laying a wall under it; And laminated beams can be used for one project. However, laminated noist is harder than the rest and cannot be installed by plumbing and electrical elements; For the purposes of strength, however, the laminated beam is the strongest.

i-joist is usually the lightest beam of the tone building group. Usually it is designedHalf -inch va (about 12.7 mm) oriented strands (OSB) and two on two inch (about 5.08 cm) pine. In principle, the OSB is cut into 14 -inch strips (about 35.6 cm), which can range from 24 to 36 feet (about 7.32 to 10.9 m) long with strips located on the upper and lower edges of the OSB. The final product will resemble the letter "I" if one looks directly along the length of the beam. The whole beam is designed using a glue that produces a beam that is as close as possible to the solid.

laminated beams are produced in different thicknesses, usually from 2 to 4 inches (about 5.08 to 10.16 cm) and from 24 to 36 feet (about 7.32 to 10.9 m) long. Laminated beams are essentially thin lumber leaves - usually plywood - that are not more than 1/4 inches (about 6.35 mm) and are sandwiched for creating a strong beam. Laminated beams differ from I-Joists in that I-Joists are not sandwiched together to form a thick beam.

faeces beams are constructed from riverZiva two of four, which is framed to form a rectangle of 16 to 24 inches (about 40.6 to 60.9 cm). The center of the rectangle is cross -decorated to add the strength of the whole beam, and the framing is attached together by means of special fasteners that connect the beams into one unit. The faeces also allow you to go through plumbing, electric and pipes to pass the beam.