What are the different types of glue on the label?

There are two basic types of glue on the label: permanent and removable. Each type can be made of different materials; Which material he chooses depends on the surface indication, the conditions that will have to withstand the label, the required longevity of the shield and its purpose. The most popular types of glue on the label are acrylic, rubber and water.

If the label is exposed to a very humid environment, such as a freezer, refrigerator or cooler, water adhesives are not practical. They break and the labels can fall from the products, regardless of the surface to which they are applied. Water -based adhesives should only be used in a dry environment.

adhesives composed mainly of rubber are preferred for their sticky. They are susceptible to failure when they are exposed to UV rays for a longer period of time. If the labels are not exposed to sunlight, this type of adhesive works well.Aion because they can be easily moved. However, once the acrylic adhesive dries, the binding is permanent. This type of adhesive onThe label is suitable for long -term products that require labels to withstand time and frequent handling. Some types can be purchased in stationery or office stores. More specialized labels and adhesives must be specially ordered based on the specifications of items to be labeled.

Six main types of adhesive labels include permanent, peel, ultra-peel, freezer or frost of fixa, high studs and static adhesion. Many factors should be considered before selecting the adhesive on the label. These include the size of the label, the texture of the facade to be marked, and the required level of mobility; Some, such as retail labels, must be removed at a certain point and others, such as transport labels, can be left intact indefinitely.

If the label is attached with an intent that has never been removed or if it is removed only by the solvent,It is called permanent. In some cases, before the label reaches a permanent state, it has a short time when it can move. These labels are often referred to as moved.

Peelable label is just that: can be peeled off the light surface. The surface exterior is not disturbed and no adhesive remains remain. This type of label can normally be used twice or three times and do not lose your sticky. The ultralight label is popularly used on book jackets and glasses where no rest is acceptable. These labels can only be used once before the adhesive is gone.

for labels that will be exposed to frost temperatures, adhesives for repair freezers or frost. It lasts extreme cold without peeling or cracking. If the label is obliged to safely hold a dirty, incorrect or rough surface, high pressure adhesive is needed. Static labels do not use traditional adhesive, but hold on very smooth surfaces, such as glass only by static charge.