What are the different types of scaffolding tools?
Several scaffolding tools are necessary to properly position the scaffolding sections and their security. Some of the tools are very commonly used, such as Hammers, Ratchet keys, crescent keys, etc., while others are specially designed scaffolding tools. One of the most commonly used tools specially designed for erect scaffolding is a subger, which is sometimes connected to a hammer or key. This tool is used to adjust the scaffolding pipe for correct alignment; The end of the hammer can be used to force the screws through the screw holes. If the other end has a rocky, it can be used to screw the screws.
The subger is equipped with a conical metal rod that can be slightly poured at the end. Such scaffolding tools can be slipped into the screw holes to level the pipeline properly; The tool can be used by pressing to the other end and when the screw holes are aligned, the tool can be removed and inserted. Most scaffolding erectors entail this tool during construction becauseIt is a key tool for creating a structure correctly. Once the bolt is in place, it must be secured with the wagon key, although some people prefer simpler scaffolding, such as a crescent keys for this work.
Almost all workers who build the scaffolding structure will bear levels, which are the scaffolding tools used to secure books or horizontal pipes, are correctly arranged and at Earth's level. Ensure that these pipes are levels prevent an uneven structure that can become unstable and drop. The level is usually relatively small and light and can be stored in a storage pocket. Sometimes the level will contain a magnet that provides a unit on the pipe to prevent falling.
Other important scaffolding tools are designed to prevent the tools from falling to the ground. The tool belts allow the worker to safely hold the tools around the waist when notIn the use and guides, the tools can connect the tools to the tool belt or around the wrist to prevent them from falling if the worker lost control of them. Sometimes scaffolding tools are designed to lift the materials up to the higher range of the structure. Buckets can be connected to the scaffolding of jacks, which are pulleys that are sometimes motorized; Lifting has a long cable with a hook at one end, which can be attached to a bucket or other materials. When the engine is activated, the pulley turns and the cable slides and lifts the materials.