What are the different types of vinyl adhesive?

vinyl flooring is installed using several methods. While some types of vinyl floors can be installed without adhesive in a method called free laying, most vinyl floor installations require the use of a type of leaf of vinyl adhesive or adhesive. The actual used adhesive product is determined by the preferred installation method. Two main categories of vinyl adhesive of the leaf are glue for peripheral bonds and fully bound adhesive. By applying the floor adhesive in this way, the entire vinyl leaf is permanently connected to the floor. This method is commonly used to install floors because it allows a wider installation range of installer errors and allows you to use in permanent installations with lower price, thinner vinyl sheets. Products of vinyl floors or for temporary installations. When gluing the perimeter, only the outer edges of the area where vinyl leaf is to be installed, covered with vinyl adhesive. In some cases, the vinyl perimeter is also stitched near the walls where trimming hides clamps. The added step of stitching the vinyl floor to the floor is used to ensure that vinyl does not stretch from the adhesive due to thermal expansion.

How fully connected and peripheral glued adhesive installations use glue with troweling. Floor manufacturers often recommend specific adhesive products and may even require a vinyl sheet to be installed using a certain vinyl adhesive brand and specific installation methods for warranty coverage that will be valid. In many cases, the adhesive can be used for circuit and fully connected installations themselves.

Safety is the primary problem in applying vinyl adhesive products for floor installation products. Vinyl adhesive can take up to 24 hours to cure and connect correctly. Before cure, vinyl glue made of sheet metal is very slippery and may cause serious injury when pedaling on exposed adhesive or vinyl floor, which intoThe barrel did not connect to the floor. When using any leaf of vinyl adhesive, it is also important to realize that chemicals in the adhesive can issue harmful vapors, cause skin irritation and can be flammable. To safely install vinyl floors with these products, they must eliminate possible ignition sources, including cigarettes, heating and pilot lights, provide appropriate ventilation and have suitable protective equipment.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?