What is the back saw?

The rear saw is a cutting tool with a belt of steel or brass running along the blade spine; This area is known as "back". The weight of his back and sharp, serrated teeth causes the saw to be good for cutting wood. In fact, the rear saws are usually used to create joints or grooves in wood. They will make a great choice for carpent and wood enthusiasts because they are versatile, efficient and tend to be smaller than a table saw. Like hand saws, their design consists of a long piece of toilet metal with a handle at one end. This basic design is what most people think when they imagine a saw. However, the rear saws are a miniature version of the classic handsa. Their reinforced blades are usually measured anywhere from 8 to 14 inches (20.3 to 35.5 cm) long with 11-20 serrated teeth per inch.

Back saws should always be used with a terminal or vice. Cut the joints in wood, carpenter orwoodworker first ensures that his project is firmly applied, and then grabs the handThe rear saw with the index finger that runs along the top of the blade for further support. The first sections should be done gently, the blade sweeps away from the body. After the introduction of the groove, it is easier to move back and forth in a traditional filing movement.

Due to its size and shape, the rear saw is the most suitable for cutting the joints and Čeni. In fact, there are two specialized versions of back that have been developed around these purposes. The jumper Teron saw creates general cuts and larger joints. As its name suggests, it is designed to create small cuts to create a dovetail joint.

The

rear saws are operated manually, so care for this tool includes regular sharpening. The small, sharp teeth must be succumbed in the main condition. Otherwise, the rear saw cuts can be harsh and irregular, and the teeth can even get stuck in wood than to bite through it. Safety risks may occur whenever you drank pThe necessary necessary, especially for hand saws that can slip or hold and cause injury.